Table of Contents
Advertisement
Recording from Qther
Device
You can record images
from devices
connected
via the AV terminal
(analog
line-in
function),
or via the DV terminal
as still images
on a memory
card.
For connecting
instructions,
refer to page 36 and 79.
1. Set the camcorder to PLAY (VCR) mode.
• If a cassette
is loaded,
make
sure that the tape is stopped.
• When recording
via the AV terminal,
make sure that "AV,,_ DV" is displayed
on the
screen.
When
recording
via the DV terminal,
make sure that "AV_
DV" is not
displayed.
Change
the setting
as necessary
([::::[3 84).
2, Connected
device:
Load
a recorded
cassette
and
play
back
the
tape.
3, Press
the
PHOTO
button
halfway
when
the
scene
you
wish
to record
appears.
• The still image, remaining
image capacity
and other
information
appear.
• When you press the PHOTO
button
on the wireless
controller,
recording
starts
immediately.
4. Press
the
PHOTO
button
fully.
The card access
indicator
flashes.
O When
recording
from a tape
in the camcorder
or other video devices:
- A still image
recorded
from an image in widescreen
mode will be vertically
compressed.
- The data code of the still image will reflect the date and time it has been
recorded
on the memory
card.
- The size of the still image will be 640 x 480. The still image quality
can be
selected.
O When
connecting
with a DV cable,
make sure that no USB cable is connected
to the camcorder.
96
Advertisement
Table of Contents
