Table of Contents
Advertisement
Transferring
Memory
Card
Images
to a
Computer
With the supplied
USB cable and Digital Video Software,
you can browse and archive
|
images
or arrange
still images for printout.
For details,
refer to the Digital
Video Software
Instruction
Manual.
Users of Windows
OS can also transfer
images to the computer
by simply pressing
the
N
(print/share)button
(_
130).
O Do not disconnect
the USB cable, open the memory
card cover,
remove the
memory
card, change
the position
of the TAPE/CARD
switch
or turn off the
camcorder
and computer
while data is being transferred
to the computer
(while
the camcorder's
card access
indicator
is flashing).
Doing
so may damage
the
memory
card's data.
O Operation
may not work correctly
depending
on the software
and the
specificationstsettings
of your computer.
O The image files on your memory
card and the image files saved on the hard
disk drive of your computer
are valuable,
original
data files. If you wish to use
image files on your computer,
make copies of them first, and use the copied
file,
retaining
the original.
0 Make
sure that camcorder
and computer
are not connected
with a DV cable
before
connecting
the camcorder
to the computer
using the USB cable.
Otherwise,
the computer
may not operate
properly.
O We recommend
powering
the camcorder
from a household
power source while
it is connected
to the computer.
O Refer
also to the computer
instruction
manual.
O Users
of Windows
XP and Mac OS X:
Your camcorder
is equipped
with the standard
Picture
Transfer
Protocol
(PTP)
allowing
you to download
still images
(JPEG only) by simply connecting
the
camcorder
to a computer
via USB cable without
installing
the software
from the
DIGITAL
VIDEO
SOLUTION
DISK.
5"
129
Advertisement
Table of Contents
