Continuous Shooting And Exposure Bracketing - Canon HV20 Instruction Manual

56 Still Image Recording Options
NOTES
In the [ FIREWORKS] recording program the
focus priority is automatically set to [
Continuous Shooting and Exposure
Bracketing
Take a series of pictures of a moving
subject or record the same picture in 3
levels of exposure in order to choose later
the picture you like the best.
POINTS TO CHECK
Mode switch: (except for the
[ FIREWORKS] recording program).
Options
[ SINGLE]
Records a single still image.
[ CONT.SHOOT. ]
(Continuous Shooting),
[ HISPEED CONT.SHOOT. ]
(High-Speed Continuous Shooting)
Captures a series of still images as long as
PHOTO
you hold pressed down. For the
number of frames per second, refer to the
table below.
[ AEB] (Auto Exposure Bracketing)
The camcorder records a still image in
three different exposures (dark, normal,
light in 1/2 EV steps), allowing you to
choose the shot you like the best.
FUNC.
( 23)
OFF].
FUNC.
FUNC.
C
ONTINUOUS
H -S
IGH
1
Press
the autofocus.
2
Press
pressed down.
A series of still images will be
( 10)
recorded as long as you hold the
button pressed down.
A E
UTO
Default value Press
the autofocus and then fully to record
the still image.
Three still images in different exposures
will be recorded on the memory card.
NOTES
The speed and maximum number of
continuous shots is as follows.
- [ CONT.SHOOT.]: Approx. 3 images/
second
- [ HISPEED CONT.SHOOT.]: Approx. 5
images/second
- Continuous Shooting with flash: Approx. 2.1
images/second
- Maximum number of shots: 60 still images
These figures are approximate and vary with
the recording conditions and subjects.
The actual number of images per second will
be lower when "
warning) is displayed on the screen.
Icon of the currently selected
Drive Mode
Desired option
S /
HOOTING
C S
PEED ONTINUOUS HOOTING
PHOTO halfway to activate
PHOTO fully and hold it
B
XPOSURE RACKETING
PHOTO , first halfway to activate
" (camcorder shake