Download Print this page
Flash Furniture Deluxe YUYCI002CKGG Assemble Instructions

Flash Furniture Deluxe YUYCI002CKGG Assemble Instructions

Mobile board

Advertisement

Quick Links

Thank you for your purchase!
Deluxe Mobile Board
ASSEMBLE INSTRUCTIONS
Before You Begin:
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the
components from the packaging and set aside for assemble. Assemble on a soft surface to prevent scratching
during assemble.
Caution:
Tighten all components securely before use. Failure to do so may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product or componenets
may result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assemble Required.
Injury may result from tipping furniture. You must install the Tipping Restraint Hardware with the unit to prevent
the unit from tipping and causing any accidental injury, instability, death or damage. The tipping restraint is
intended only as a safety measure, it is not a substitute for proper adult supervision.
This tipping restraint is not an earthquake restraint. If you wish to add the extra security of earthquake
restraints, they must be purchased and installed separately.
Serious or fatal crushing injuries can occur from furniture tipping over. To prevent furniture from tipping over it
ferent wall materials
Failure to detach this restraint before moving furniture may result in injury or damage.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Customer Service email: CustomerExperience@belnickinc.com | phone: 866-552-2810
YCI-001-2-GG/YCI-003-2-GG/YCI-005-2-GG/YCI-008-2-GG/YCI-001-2-CK-GG/YCI-002-2-CK-GG/YCI-003-2-CK-GG/YCI-004-2-CK-GG/YCI-005-2-CK-GG

Advertisement

loading

Summary of Contents for Flash Furniture Deluxe YUYCI002CKGG

  • Page 1 Thank you for your purchase! Deluxe Mobile Board ASSEMBLE INSTRUCTIONS Before You Begin: Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the components from the packaging and set aside for assemble. Assemble on a soft surface to prevent scratching during assemble.
  • Page 2: Part List

    Parts NOTE: Teamwork Required. PART LIST Q’TY Thank you for your purchase!
  • Page 3 Parts NOTE: Teamwork Required. HARDWARE LIST HARDWARE SPEC Q’ TY Lock nuts Pieces Washers Pieces M10*43 Bolts Pieces Set screw Pieces Flange nuts Pieces Hand wheels Pieces Wrench Pieces Thank you for your purchase!
  • Page 4 STEP 1 Assemble buttom part of support. Make sure the casters are on the same side. STEP 2 Thank you for your purchase!
  • Page 5 STEP 3 Assemble set screw. STEP 4 Assemble white board. Thank you for your purchase!
  • Page 6 STEP 5 Final. Thank you for your purchase!

This manual is also suitable for:

Deluxe yuyci004ckggDeluxe yuyci003ckggDeluxe yuyci003ggDeluxe yuyci005gg