Flash Furniture HERCULES Series Assembly Instructions

ASSEMBLY INSTRUCTIONS
Before You Begin:
Please identify all component parts and hardware pieces required before you begin. Carefully remove all
of the components from the packaging and set aside for assembly. Assemble on a soft surface to prevent
scratching during assembly.
Caution:
Tighten all components securely before use. Failure to do so may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product or compone-
nets may result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required.
Injury may result from tipping furniture. You must install the Tipping Restraint Hardware with the unit to
prevent the unit from tipping and causing any accidental injury, instability, death or damage. The tipping
restraint is intended only as a safety measure, it is not a substitute for proper adult supervision.
This tipping restraint is not an earthquake restraint. If you wish to add the extra security of earthquake
restraints, they must be purchased and installed separately.
Serious or fatal crushing injuries can occur from furniture tipping over. To prevent furniture from tipping
over it must be permanently fixed to the wall. Fixing devices for the wall are not included since different
wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your
home.
Failure to detach this restraint before moving furniture may result in injury or damage.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Customer Service email: CustomerExperience@belnickinc.com | phone: 866-552-2810
Thank you for your purchase !
HERCULES Series Big &
Tall 400 lb. Rated Black
Mesh Ergonomic Drafting
Chair with Adjustable
Arms
WL-5029SYG-AD-GG