Flash Furniture MH-LBD5-WH-T-GG Assembly Instructions Manual

Thank yo u fo r y our purchase!
Twin Loft Bed
With Desk
ASSEMBLY INSTRUCTIONS
Before You Begin:
Please identify all component parts and hardware pieces required before you begin.
Carefully remove all of the components from the packaging and set aside for assembly.
Assemble on a soft surface to prevent scratching during assembly.
Caution:
Tighten all components securely before use. Failure to do so may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product
or components may result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Serious or fatal injuries can occur from furniture tipping over. You must install Tipping
Restraint Hardware (where included) to help prevent the unit from tipping and causing
accidental injury, instability, death or damage. The tipping restraint is intended only as a
safety measure, it is not a substitute for proper adult supervision.
To help prevent furniture from tipping over it must be permanently attached to the wall.
Anti-Tip Safety Wall Straps suitable for the unit weight and wall materials (ifnot included)
should be purchased and installed.
Customer Service Email: CustomerExperience@belnick.com | Phone: 866-552-2810
MH-LBD5-ESP-T-GG / MH-LBD5-WH-T-GG
01/16