Setting Clock & Minute Timer; Some Models - Frigidaire FGF316BSA Use & Care Manual

Electric or pilot ignition with or without clock
Hide thumbs Also See for FGF316BSA:
Table of Contents

Advertisement

Setting Clock & Minute Timer
Models with no Clock (some models)
If your model has no Clock or Minute Timer, clock settings are not required to operate your range. Please proceed to Setting
Surface & Oven Controls in this Use & Care Manual.
Note: The 3 button clock graphics shown vary by model.
To Set the 3 Button Minute Timer (some models)
1. Slide switch C (CLOCK/TIMER) to the TIMER position, "0:59" (59 MINUTES) will appear in the display window. The timer
can be set for any amount of time from 1 minute to 1 hour and 59 minutes.
2. • To set a time more than 59 minutes, push in and release button A (HOUR). The display will show the maximum 1 hour
and 59 minutes. The time can now be adjusted down by pushing in and holding button B (MINUTE) until the correct
time appears in the display window.
• To set a time less than 59 minutes, push in and hold button B (MINUTE) until the correct minutes appear in the display.
(The minute timer will automatically start when the button is released.)
3. When the set time has passed, the control will display "0:00" and beep continuously. Slide switch C (CLOCK/TIMER)
to the CLOCK position to cancel the timer and return to the clock mode.
Before Setting Oven Controls

(some models)

To Set the 3 Button Clock (some models)
When the range is first plugged in, or when the power supply to
the range has been interrupted, "12:00" will flash in the display
window.
1. Slide switch C (CLOCK/TIMER) to the CLOCK position.
2. Push in and hold button A (HOUR) until the correct hour
appears in the display. (The numbers will only count forward.)
3. Push in and hold button B (MINUTE) until the correct
minutes appear in the display.
6

Advertisement

Table of Contents
loading

Table of Contents