Frigidaire FKOF38MDIS Instruction Manual page 24

2. Install the grease collection pan (P)
under the drip pan (N) as shown.
Hardware used
CC Screw
x 4
M4 x 10
Flat
GG
x 4
Washer
Step 8
1. Place the grill housing assembly (J)
on the top of the cabinet assembly.
2. Install two screws (AA) and two
spring washers (HH) and two flat
washers (EE) into each hole on left
side of the grill housing assembly.
45
P
J
3. Repeat the procedure for the right
side of the grill housing assembly.
Hardware used
Screw
x 4
AA
M6 x 12
Spring
FF
x 4
Washer
Flat
EE
x 4
Washer
Step 9
1. Loosen the five side panel screws
on the left side of the body
assembly and allow 1/4 of the
screws length to extend from the
grill housing assembly. DO NOT
COMPLETELY REMOVE SCREWS.
2. Align the large holes of the left side
table assembly with the screws
extended from the grill housing
assembly.
46