Related Manuals for Jet JWS Series
Summary of Contents for Jet JWS Series
- Page 1 Operating Instructions and Parts Manual Web Strap Ratchet Hoists JWS-Series 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-352100 Ph.: 800-274-6848 Edition 1 07/2016 www.jettools.com Copyright © 2016 JET...
-
Page 2: Important Safety Instructions
Do not use this hoist for other than its intended people. use. If used for other purposes, JET disclaims any real or implied warranty and holds itself 25. The hoist is to be hand-powered by one harmless from any injury that may result from operator only. -
Page 3: Alternating Current - Minimum Distances
The web strap hoists are proof-tested and comply with OSHA, ANSI/ASME B30.21 Lever Hoists and B30.10 Hooks standards. If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our web site: www.jettools.com. -
Page 4: Table Of Contents
3.0 Table of contents Section Page 1.0 IMPORTANT SAFETY INSTRUCTIONS ....................... 2 1.1 Alternating Current – Minimum Distances ....................3 2.0 About this manual ............................3 3.0 Table of contents ............................4 4.0 Specifications for JWS-series Web Strap Hoists ................... 5 ... -
Page 5: Specifications For Jws-Series Web Strap Hoists
5.41kg (11.9 lb) Table 2 Specifications in this manual were current at time of publication, but because of our policy of continuous improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring obligations. -
Page 6: Features
5.0 Features Figure 5-1: features and rigging (double pull model shown) -
Page 7: Operation
6.0 Operation Do not attempt free-wheel while hoist is under load. Use of the web strap hoist If lever is set to UP position, around energized lines may result in serious or handle will rotate during free-wheel and may fatal injury. It is the operator’s responsibility to cause injury. -
Page 8: Hook Wear Limits
Read and follow all relevant ANSI Inspection and Maintenance standards, particularly ANSI/ASME B30.21 Lever Hoists. Know the meaning of Frequent Inspection, Periodic Inspection, Normal Service, Heavy Service, and Severe Service. It is the customer’s responsibility to understand and follow all ANSI and JET inspection and maintenance instructions. -
Page 9: Inspection Schedules
Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from JET. Some parts are shown for reference only, and may not be available individually. -
Page 10: Jws-2A Web Strap Hoist - Exploded View
11.1.1 JWS-2A Web Strap Hoist – Exploded View... -
Page 11: Jws-2A Web Strap Hoist - Parts List
11.1.2 JWS-2A Web Strap Hoist – Parts List Index No. Part No. Description Size 1 ....TS-1504031 ....Hex Socket Head Cap Screw ........M8x16 ......1 2 ....TS-2361081 ....Lock Washer ............M8 ......... 1 3 ....TS-1550061 ....Flat Washer ............. M8 ......... 1 4 .... -
Page 12: Jws-25A Web Strap Hoist - Exploded View
11.2.1 JWS-25A Web Strap Hoist – Exploded View... -
Page 13: Jws-25A Web Strap Hoist - Parts List
11.2.2 JWS-25A Web Strap Hoist – Parts List Index No. Part No. Description Size 1 ....TS-1504031 ....Hex Socket Head Cap Screw ........M8x16 ......1 2 ....TS-2361081 ....Lock Washer ............M8 ......... 1 3 ....TS-1550061 ....Flat Washer ............. M8 ......... 1 4 .... -
Page 14: Jws-3A Web Strap Hoist - Exploded View
11.3.1 JWS-3A Web Strap Hoist – Exploded View... -
Page 15: Jws-3A Web Strap Hoist - Parts List
11.3.2 JWS-3A Web Strap Hoist – Parts List Index No. Part No. Description Size 1 ....TS-1505011 ....Hex Socket Head Cap Screw ........M10x16 ......1 2 ....TS-2361101 ....Lock Washer ............M10 ....... 1 3 ....TS-1550071 ....Flat Washer ............. M10 ....... 1 4 .... -
Page 16: Jws-4A Web Strap Hoist - Parts List
11.4.1 JWS-4A Web Strap Hoist – Parts List... -
Page 17: Jws-4A Web Strap Hoist - Parts List
11.4.2 JWS-4A Web Strap Hoist – Parts List Index No. Part No. Description Size 1 ....TS-1505011 ....Hex Socket Head Cap Screw ........M10x16 ......1 2 ....TS-2361101 ....Lock Washer ............M10 ....... 1 3 ....TS-1550071 ....Flat Washer ............. M10 ....... 1 4 .... -
Page 18: Warranty And Service
JET sells through distributors only. The specifications listed in JET printed materials and on official JET website are given as general information and are not binding. JET reserves the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason ®... - Page 19 This page intentionally left blank.
- Page 20 427 New Sanford Road LaVergne, Tennessee 37086 Phone: 800-274-6848 www.jettools.com...