Removing The Camera - Panasonic AW-HN40HKPJ Operating Instructions Manual

Removing the camera

1
Turn off the circuit breaker and power.
2
Disconnect the cables.
Disconnect the power cable, video cable, and control cable, etc.
3
Remove the main unit mounting screw used to secure the unit and mount bracket.
4
Push the unit (A). Turn it approximately 15 degrees away from the installed position (B),
and remove it (C).
Main unit mounting
screw (M3 screw)
(with flat washer,
spring washer)
Note
● Do not do this work while holding the camera head since doing so may result in malfunctioning of the unit.
5
Disengage the drop-prevention wire from the mount bracket.
14
Approx.
15°