Noise Reduction; Color Matrix; White Balance; Position/Clock - NEC MultiSync LT50 User Manual

Micro-portable

Hide thumbs Also See for MultiSync LT50:

Table of Contents

Noise Reduction

(not available for RGB and PC Card Viewer)

You can select three levels video noise reduction.

NOTE: The lower the Noise Reduction level, the better the image quality by

way of higher video bandwidth.

(available for component video signal only)

First select an appropriate color matrix to fit your component signal

for HDTV or SDTV. Then select an appropriate matrix type from B-

Y/R-Y, Cb/Cr or Pb/Pr.

(not available for PC Card Viewer)

This allows you to adjust the white balance. Brightness for each color

(RGB)is used to adjust the black level of the screen;

Contrast for each color (RGB)to adjust the white level of the screen.

First use the

buttons to select R, G, or B for the brightness

and the contrast. Next use the

Position/ Clock (when Auto Adjust is off)

This allows you to manually adjust the image horizontally and verti-

cally, and adjust Clock and Phase.

Horizontal/Vertical Position:

Adjusts the image location horizontally and vertically using the

and

buttons.

This adjustment is made automatically when the Auto Adjust is turned

on. See "Auto Adjust (RGB Only) on page E-41 for turning on or off

the Auto Adjust feature.

E–38

buttons to adjust the level.

Table of Contents

Multisync lt85