Download Print this page

NEC LT30 Installation Manual

Nec lt30: installation guide
Hide thumbs Also See for LT30:

Advertisement

LT30/35 Installation Guide
Ceiling Mounted and Desktop
Contents
Product Description, Lens Specs, Notes and Formulas
Diagrams & Distance Charts
Cabinet Dimensions_____________
Ceiling Mount Dimensions
Input Panel and Control Codes

Product Description

Type:
.7 DDR DMD™ projector
Resolution:
1024 x 768
Brightness:
LT30: 2600 ANSI Lumens
LT35: 3000 ANSI Lumens

Lens Specifications

Throw Ratio:
1.8 – 2.16:1 (for 100" diagonal)
Offset Angle:
9.8° - 11.7° (for 100" diagonal)
Screen Sizes:
30" - 300" diagonal (4:3)
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
All calculations are based on 4:3 aspect ratio.
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Formulas
The Projection Formulas use the image width for calculation. For proper projection placement, determine the image width
for the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the width for "W" in
the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2:
Definitions:
W = Image Width
H = Image Height (size)
B = Vertical distance between lens center and screen center
C = Throw distance
D = Vertical distance between lens center and screen top
(screen bottom for desktop application)
Projection Formulas:
B = 0.375W
C (wide) = 1.831W – 2.076
C (tele) = 2.19W – 2.08
α (wide) = tan¯¹ (B/C(wide))
α (tele) = tan¯¹ (B/C(tele))
______________________________________________________________________________________________________________________
www.necvisualsystems.com
_________
NEC Solutions (America), Inc.
Visual Systems Division
Pg 1
Pg 2
Pg 3
Pg 4
Pg 5
Dimensions:
10.24"(W) x 3.5"(H) x 8.2"(D)
Weight:
4.4 lbs
Focal Length:
25.7 – 30.8 mm
F/#:
2.4 – 2.6
Manual Zoom/Power Focus (w/autofocus)
4:3 Screen Formulas:
W = H x 4/3
H = W x 3/4
Screen Diagonal = W x 5/4
Rev 1.0
LT30/35
Page 1 of 6

Advertisement

loading

Summary of Contents for NEC LT30

  • Page 1: Product Description

    Input Panel and Control Codes Product Description Type: .7 DDR DMD™ projector Resolution: 1024 x 768 Brightness: LT30: 2600 ANSI Lumens LT35: 3000 ANSI Lumens Lens Specifications Throw Ratio: 1.8 – 2.16:1 (for 100” diagonal) Offset Angle: 9.8° - 11.7° (for 100” diagonal) Screen Sizes: 30”...
  • Page 2: Diagrams And Distance Charts

    LT30/35 Installation Guide Ceiling Mounted and Desktop Diagrams and Distance Charts The following diagrams show the relationship between projector position and the screen. Refer to the chart below for data. Distances are in inches. For millimeters multiply by 25.4. Ceiling Mounted...
  • Page 3: Cabinet Dimensions

    LT30/35 Installation Guide Ceiling Mounted and Desktop Cabinet Dimensions The following drawings show the cabinet dimensions. Dimensions are in inches. For millimeters multiply by 25.4. 1.35 1.94 ______________________________________________________________________________________________________________________ www.necvisualsystems.com NEC Solutions (America), Inc. Visual Systems Division Zoom Control 1.77 10.24 ventilation 3.35...
  • Page 4 LT30/35 Installation Guide Ceiling Mounted and Desktop Cabinet Dimensions (continued) The following drawings show the cabinet dimensions. Dimensions are in inches. For millimeters multiply by 25.4. ______________________________________________________________________________________________________________________ www.necvisualsystems.com NEC Solutions (America), Inc. Visual Systems Division Rev 1.0 LT30/35 Page 4 of 6...
  • Page 5 LT30/35 Installation Guide Ceiling Mounted and Desktop Optional Ceiling Mount Dimensions (Model #: LT30CM ) The following drawings show the ceiling mount dimensions. Dimensions are in inches. For millimeters multiply by 25.4. 8.813 ______________________________________________________________________________________________________________________ www.necvisualsystems.com 1.5 NPT NEC Solutions (America), Inc.
  • Page 6: Input Panel

    None Communications: Full duplex NOTE 1 : Pins 2, 3, 5, and 6 are used inside the projector. NOTE 2: For long cable runs it is recommended to set communication speed within the projector to 9600 bps. ______________________________________________________________________________________________________________________ www.necvisualsystems.com VIDEO IN S-VIDEO IN NEC Solutions (America), Inc.

This manual is also suitable for:

Lt35