Error messages
N
Main monitor station/Sub monitor station
Problem
IN USE
PROTECTED PIC
REMOVE PROTECT
(Main monitor station)
PROTECT PIC FULL
CAN NOT PROTECT
(Sub monitor station)
PROTECT FULL
CANT PROTECT
N
Sub monitor station only
Problem
CAN NOT CONNECT
REGISTRATION ERROR
Cause & Solution
L The main monitor station or the sub monitor station is in use.
Try again later.
L The image you tried to erase is protected. Release the
protection, then erase it.
L T he number of images you can protect has been exceeded.
You can protect up to 20 images. Release the protection from
other images, then try again.
– Unprotected images will be overwritten by new images.
Cause & Solution
L The sub monitor station is too far from the main monitor
station. Move closer to the main monitor station. If you install a
repeater (optional), the problem may be solved.
L There is an object such as a concrete wall obstructing the
signal. Move to a place without an obstacle. If you install a
repeater (optional), the problem may be solved.
L A microwave or wireless LAN appliance is in use. Move closer
to the main monitor station or use a sub monitor station located
away from those appliances. Try again.
L The registration to the main monitor station is not completed.
Move closer to the main monitor station and register it again.
Help
Page
―
30
31
30
Page
7, 45
7, 45
7
44
51