Changing The Function Settings Of The Sub Monitor Station (Function List) - Panasonic VL-SW251BX Operating Instructions Manual

Programming
Changing the function settings of the sub monitor station
(Function list)
How to change the function settings
{MENU}
Note:
L W hen receiving a call while setting or no operation is done for about 90 seconds, the setting function screen
automatically quits.
Function list of the sub monitor station
The default setting is indicated in bold.
Item (function)
RING VOLUME
RING TONE
40
{ } {▲}
{D}
{OFF}
Setting
DOOR: HIGH, MEDIUM, LOW, OFF
PAGE : HIGH, MEDIUM, LOW
L Y ou can select the ringer volume of the sub monitor station (page 33).
DOOR 1: SOUND1, SOUND1 REPEAT,
SOUND2, SOUND2 REPEAT,
SOUND3, SOUND3 REPEAT
DOOR 2: SOUND1, SOUND1 REPEAT,
SOUND2, SOUND2 REPEAT,
SOUND3, SOUND3 REPEAT
L Y ou can select the ringer tone of the sub monitor station for calls from a door
station (page 34).
1
Press {MENU}, then select the desired item by
pressing { } or {▲}.
2
Press {D} (OK), then select the desired setting
by pressing { } or {▲}.
L I n some functions, repeat this operation
according to the display instructions.
3
Press {D} (OK).
4
To end the setting, press {OFF}.