Reviewing And Deleting The Last Scene Recorded - Canon HG10 Instruction Manual

Video
NOTES
• When you wake up the camcorder from
standby mode, the following settings
will be changed automatically:
- Manual focus returns to automatic
focus (AF).
- Manual exposure adjustment returns
to automatic exposure.
- Zoom position returns to full wide
angle W.
- Automatic backlight correction
deactivates.
• The camcorder will shut off if left in
standby mode for 10 minutes,
regardless of the [POWER SAVE] setting
( 49). You can select the length of
time until shut-off with the [
OFF] setting ( 49).
To restore the power if the camcorder
shut off, turn the
MODE and release it, or turn the
switch to and back to ON again.
• If you perform any of the following
actions while in standby mode (while the
standby lamp is on), the camcorder will
return to record pause mode.
- Change the position of the
switch.
- Turn the switch toward MODE.
Reviewing and Deleting the Last Scene
Recorded
Even in
back the last scene recorded in order to
check it. You can also delete the scene
while reviewing it.
36
STANDBY
switch toward
/
mode you can play
1
If the function guide does not
appear on screen, press
display it.
2
Press to select
• If does not appear on the
function guide, repeatedly press
to display it.
• The camcorder plays back the last
scene (but without sound) and
returns to record pause mode.
Deleting a Scene After Recording It
After recording a scene:
1
Review the scene as described in
the previous section.
2
While reviewing the scene, press
to select and press
3
Press to select [YES] and press
.
NOTES
• Avoid any other operations on the
camcorder while the scene is being
deleted.
• You will not be able to delete the last
scene if after the scene was recorded
you changed the operating mode or the
camcorder was turned off.
( 24)
to
.
( 24)
.