UXADBS36PSS, UXADBS48PSS Accessory Installation
ACCESSORIES—30" TO 36" ADJUSTABLE BACKSPLASH (not included)
TOOLS AND MATERIALS REQUIRED
Top Cover
with Shelf
This Kit Includes
self-tapping screws
#10 screws
#10 screws (for alternate
installation method)
18
Top Wall
Support
Bottom Cover
Bottom Wall Support
Hardware
Package
INSTALL THE WALL SUPPORT PANELS
WARNING
The wall support panels must be
securely fastened to the wall. Failure to do so could
result in damage or personal injury.
IMPORTANT: This backsplash is designed to cover
the wall between the bottom of the hood and the top of
the range. The vent hood should be installed over the
rangetop or range before installing this backsplash.
the product installation instructions.
the cover panels to overlap the wall supports.
panel. The center slot should be positioned at the top.
The gap between the top and bottom support panels
will be covered by the top cover with shelf.
Center
Arrow
Wood
Screws
Secure the
top panel to
the wall with 4
wood screws
Wood
Screws
Secure the
bottom panel to
the wall with 4
wood screws
31-2000815 Rev. 0