Canon elura50 Instruction Manual page 112

Recording from a Tape in the Camcorder
E
You can record a movie from a tape to a memory card.
• The data code of the movie will reflect the date and time it has been recorded to
the memory card.
PLAY
+
TAPE
(VCR)
1. Turn the camcorder's POWER switch to PLAY (VCR) and move
the TAPE/CARD switch to TAPE.
2. Play back the cassette.
3. When the image you want to record appears in the display, press
the start/stop button.
• You can record up to 10 seconds in 320×240 and 30 seconds in 160×120.
• Press the start/stop button to end recording.
• The camcorder starts to write the movie to the memory card when recording
is finished.
• You can also start recording during record pause mode by pressing the
start/stop button.
Note:
• If you record a movie to a memory card that was originally recorded in the 16:9
mode for wide screen TVs, the image will appear to be vertically "squashed"
(compressed).
112