Canon elura50 Instruction Manual page 68

7. Select the desired setting.
E • You return to the digital effects menu.
8. Press the D.EFFECTS SELECT button to close the menu.
• The digital effects menu disappears.
• MULTI-S flashes in the display.
Multi-image screen on/off
9. Press the D.EFFECTS ON/OFF button.
• MULTI-S stops flashing.
• Manual: As you press the D.EFFECTS ON/OFF button, scenes will be
captured one after another in the indicated number of times. If you push and
hold the D.EFFECTS ON/OFF button for more than a second, the last
image captured will be erased.
• The image currently being recorded is framed in blue. The frame disappears
after the last image is captured.
• Automatic: The camcorder will capture the indicated number of images at
the indicated speed.
10.Press the start/stop button to begin recording.
• The multi-image screen is recorded to the tape.
Notes:
• You can operate the multi-image screen from record or record pause mode.
• After all the images have been captured, press the D.EFFECTS ON/OFF button
quickly to cancel the multi-image screen.
• When you are operating the multi-image screen in TAPE PLAY (VCR) mode,
the multi-image screen will be canceled if you press any tape operating buttons
(such as the play/pause button), or if you perform date/photo search.
• You cannot use digital zoom or the 16:9 mode when the multi-image screen is
set. The display becomes "– – –".
• The multi-image screen cannot be selected when Card Mix is activated.
68