Recording Still Images Onto A Tape - Canon elura50 Instruction Manual

Recording Still Images onto a Tape

To take still images on a memory card, see p. 106.
E
You can record still images like photographs. The camcorder records the picture
and sound to tape for several seconds. The exposure is automatically adjusted.
Copy still images automatically to a memory card (
image enhancement and printout. Also, starting your shooting with a still image
makes it easy to find the beginning again later with the Photo Search function
( 83).
You can take a still image at any time during regular video recording, or you can
put the camcorder into record pause mode first, then take a still image.
+
TAPE CAMERA
During record mode
Press the PHOTO button fully down and the still image will be taken
immediately.
• The camcorder takes the image immediately, and then records the "photo" to the
tape for approximately 6 seconds. During this time the camcorder also records
the sound, and the display shows the still image.
• A counter display appears, and counts up as the camcorder records the image.
• The camcorder returns to record pause mode.
During record pause mode
1. Press the PHOTO button halfway down and hold it.
• "PHOTO" flashes at the bottom right of display.
• Exposure is locked.
• During autofocus F flashes white in the display as the camcorder adjusts the
focus and it is displayed continuously as a green mark when the camcorder
is ready to take the still image.
54
PHOTO
137) for transfer to a PC for