Advertisement
ALIGNMENT PROCEDURE (CONT.)
16.
Remove the Alignment Punch and the piece of sheet metal.
17.
Remove the Alignment Die or Die Carrier
18.
The station is now aligned.
Mate Precision Technologies • 1295 Lund Boulevard • Anoka, Minnesota 55303 USA • Phone +1.763.421.0230 • 800.328.4492 • Fax +1.763.421.0285 • 800.541.0285
The Mate Logo is a registered trademark of Mate Precision Technologies Inc.
© Mate Precison Technologies Inc.
MATE 2-PIN LINE UP TOOL
USAGE INSTRUCTIONS
Step 16
Step 17
Dimensions in Inches(millimeters)
mate.com
LIT01233 Rev B
Advertisement
