Advertisement
CHECK MULTI TOOL ALIGNMENT (CONT.)
8.
Once the piece of metal is in place, dis-engage the machine turret alignment pins and
rotate the station back to the tool change position.
9.
Remove the Alignment Punch and Alignment Die or Die Carrier.
Mate Precision Technologies • 1295 Lund Boulevard • Anoka, Minnesota 55303 USA • Phone +1.763.421.0230 • 800.328.4492 • Fax +1.763.421.0285 • 800.541.0285
The Mate Logo is a registered trademark of Mate Precision Technologies Inc.
© Mate Precison Technologies Inc.
MATE 2-PIN LINE UP TOOL
USAGE INSTRUCTIONS
Dimensions in Inches(millimeters)
mate.com
LIT01233 Rev B
Step 8
Step 9
Advertisement
