Daily Use - Drying Only - Electrolux EWW1696SWD User Manual

Hide thumbs Also See for EWW1696SWD:
Table of Contents

Advertisement

• After 5 minutes from the end of the
washing programme
Press the button
appliance again.
The display shows the end of the last
set programme.
Turn the programme knob to set a
new cycle.

11. DAILY USE - DRYING ONLY

WARNING!
Refer to Safety chapters.
11.1 Drying setting
WARNING!
Make sure that the water
tap is open.
1. Press On/Off for some seconds to
activate the appliance.
2. Load the laundry one item at a time.
3. Turn the programme dial to the
programme applicable for the items
to dry. The display shows the drying
indicator
To have a good drying
performance do not exceed
the maximum drying loads
recommended in the user
manual. Do not set a spin
speed lower than the
automatic speed of the set
programme.
11.2 Drying at automatic levels
The laundry can be dried at pre-defined
levels of dryness:
1. Press
display shows one of the dryness
level indicator:
: IRON DRY level indicator for
cotton items
: CUPBOARD DRY level
indicator for cotton, synthetic, silk
and wool items
: EXTRA DRY level indicator
for cotton items
to activate the
.
again and again until the
If you set a programme or an
option that ends with water
in the drum, the AUTO
Stand-by function doesn't
deactivate the appliance to
remind you to drain the
water.
The display shows a time value,
calculated on the default load size. If the
amount of your laundry is more or less
than the default size, the appliance
adjusts automatically the time value
during the cycle.
2. Press
to start the programme.
The display shows the door locked
indicator
. The drying indicator
starts to flash.
You cannot set all dryness
levels for any type of
laundry.
11.3 Timed drying
The laundry can also be dried with a
manual timed drying:
1. Press
again and again to set the
time value (see the «Programmes for
timed drying» table).
• The display shows 10 minutes.
Each time you press this
touchpad the time value increases
by 5 minutes.
• The display shows the set time
value: for example –
• After some seconds the display
shows a new time value:
appliance calculates also the
duration of the anti-crease and
the cooling phases.
2. Press
to start the programme.
• The display shows regularly a
new time value.
• The drying indicator
flash.
• The display shows the door
locked indicator
ENGLISH
21
.
. The
starts to
.

Advertisement

Table of Contents
loading

Table of Contents