MABRU POWER SYSTEMS SC Series Installation Manual page 28

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAG-
ES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. ANY IMPLIED WARRANTY, INCLUDING THE
IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PURPOSE, IS LIMITED TO THE DURATION
OF THIS LIMITED WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR-
RANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES SPECIFIC
LEGAL RIGHTS, YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Mabru reserves
the right to improve or change the design of any Mabru product without notice and with no obligation to make
corresponding changes in Mabru products previously manufactured.
2. WHAT'S NOT COVERED What does this Limited Warranty not cover? This Warranty Shall Not Apply to: 1.
Failures resulting from improper or faulty installation, installation that does not comply with Mabru's instructions
or otherwise, installation that does not comply with any American Boat and Yacht Council ("ABYC") standards,
and any damage resulting from such. 2. Failures resulting from abuse, misuse, accident, fire, submergence,
improper application or use contrary to instructions. 3. Failures resulting from lack of regular preventative mainte-
nance as outlined within the Operator's Manual specific to your Mabru product. 4. Any Mabru product, which has
been altered so as to impair its original characteristics. 5. Items not manufactured by Mabru. 6. Mabru products
used by or applied by the owner as an integral part of products not manufactured by Mabru. 7. Additional labor
charges associated with the removal, reinstallation, or replacement of any equipment or furnishings beyond the
particular covered Mabru product. The original installer or OEM is responsible for the accessibility of the Mabru
product. 8. The Servicing Dealer's travel costs in excess of 1.0 (one) hour. 9. Pumps with cracked heads or pumps
that have been run dry, are water damaged or have blown freeze plugs. 10. Gauge instrument calibration. 11. Exte-
rior corrosion. 12. Water damage, including specifically to the following components: blowers, logic boards and
displays heads. 13. Incorrect programming of displays. 14. Dirty Condensers and/or Evaporators. 15. Failures
due to improper winterization. 16. Mabru product damage as a result of improper return packaging or other
freight damage. 17. Replacement of refrigerant with substitute without Mabru preauthorization. 18. Environmen-
tal and/or Recovery Fees. 19. Welding and Nitrogen Fees. Installation and application of Mabru products are not
warranted by Mabru unless installation was performed in house because Mabru has no control or authority over
the selection, location, application, or installation of Mabru products.
3. GETTING SERVICE How do you get service? Please read the following Warranty Procedure: In order to obtain
the benefits of this Warranty, the owner needs to first submit the Mabru Warranty Claim form, which may be
obtained by requesting from our claims department by emailing support@mabrumarine.com. Upon approval of
the claim, the owner has the following three options during the applicable Warranty Coverage Period: 1) Preferred
option: Have a Mabru authorized Servicing Dealer perform the work needed. The customer needs to contact the
Mabru Customer Service Department for a recommendation as to the closest authorized Servicing Dealer.
+1 888 818 2814 support@mabrumarine.com
Page No.28