Toro 03188 Operator's Manual page 25

The Toro Company, 8111 Lyndale Ave. South, Bloomington, MN, USA declares that the following unit(s)
conform(s) to the directives listed, when installed in accordance with the accompanying instructions onto certain
Toro models as indicated on the relevant Declarations of Conformity.
Model No. Serial No.
03188 407900000 and Up
03189 407900000 and Up
03190 407900000 and Up
03191 407900000 and Up
03192 400000000 and Up
Relevant technical documentation has been compiled as required per Part B of Annex VII of 2006/42/EC.
We will undertake to transmit, in response to requests by national authorities, relevant information on this partly
completed machinery. The method of transmission shall be electronic transmittal.
This machinery shall not be put into service until incorporated into approved Toro models as indicated on the
associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in
conformity with all relevant Directives.
Certified:
Tom Langworthy
Engineering Director
8111 Lyndale Ave. South
Bloomington, MN 55420, USA
June 7, 2021
Declaration of Incorporation
Product Description
5-Blade 27-inch DPA
Edge Series Cutting Unit,
Reelmaster 3100-D Series
Traction Unit
8-Blade 27-inch DPA
Edge Series Cutting Unit,
Reelmaster 3100-D Series
Traction Unit
11-Blade 27-inch DPA
Edge Series Cutting Unit,
Reelmaster 3100-D Series
Traction Unit
8-Blade 32-inch DPA
Edge Series Cutting Unit,
Reelmaster 3100-D Series
Traction Unit
27-inch 8-Blade EdgeSeries
DPA Cutting Unit, Reelmaster
3105-D Traction Unit
Invoice Description
RM3100 27IN 5-BLADE
(RR) ES DPA CU
RM3100 27IN 8-BLADE
(RR) ES DPA CU
RM3100 27IN 11-BLADE
ES (RR) DPA CU
RM3100 32IN 8-BLADE
ES (RR) DPA CU
RM3105 27IN, 8BLD RR ES
NO FRT ROLLER CU
Authorized Representative:
Marcel Dutrieux
Manager European Product Integrity
Toro Europe NV
Nijverheidsstraat 5
2260 Oevel
Belgium
General Description Directive
Cutting Unit 2006/42/EC
Cutting Unit 2006/42/EC
Cutting Unit 2006/42/EC
Cutting Unit 2006/42/EC
Cutting Unit 2006/42/EC