Error Signs - Sanyo FXD-888GD Operating Instructions Manual

ERROR SIGNS

CD Player
If a problem should occur while operating the built-in CD player, one of the following error signs
may be displayed:
Error Sign
CD Changer
If a problem should occur while operating the connected CD changer, one of the following error signs may
be displayed.
Error Sign
Error Sign
Cause
Abnormal CD mechanism function.
The disc is dirty.
CD is inserted upside down.
Internal connection check error.
No disc in the player.
Cause
Abnormal mechanism function
The disc was inserted incorrectly.
The disc is dirty.
The disc is defective.
There is condensation on the
optical lens.
Excessive temperature has been
detected in the vehicle.
No discs in the magazine.
The connector is connected
incorrectly.
Cause
Abnormal amplifier.
Press the eject button.
Turn the power off and then on again.
If it is not corrected, contact the place
of purchase.
Clean the disc.
Insert the CD properly.
Contact the place of purchase.
Insert the disc.
Contact the place of purchase.
Insert the disc properly.
Clean the disc.
Use another disc.
Leave the disc player off for an hour
or so, then try again.
Refer to the instructions supplied with
the CD changer.
Allow the car to cool.
Load discs into the magazine.
Connect the connector correctly and
securely until it clicks.
Check the speaker line code.
-18-
Remedy
Remedy
Remedy