1. Manuals
  2. Brands
  3. ERNITEC Manuals
  4. DVR
  5. EDNS V3000 Series
  6. User manual

ERNITEC EDNS V3000 Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Ernitec EDNS V3000 series
User manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EDNS V3000 Series and is the answer not in the manual?

Questions and answers

Related Manuals for ERNITEC EDNS V3000 Series

Summary of Contents for ERNITEC EDNS V3000 Series

  • Page 1 Ernitec EDNS V3000 series User manual...
  • Page 2 Ernitec EDNS V3000 series – user manual Caution and Preventive Tips  Handle with care, do not drop the unit  Mount the unit in an equipment rack or place it on a solid, stable surface  Indoor use only. Do not place the unit in a humid, dusty, oily, or smoky site ...
  • Page 3 Ernitec EDNS V3000 series – user manual Important Information Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your unit, check for missing or damaged items.

  • Page 4: Table Of Contents

    Ernitec EDNS V3000 series – user manual Table of Content 1. Overview ........................6 2. System Setup ........................ 7 Position the DVR ....................7 Connect Devices to the DVR ................7 Rear Panel Connections ..................9 3. General System Setup ....................
  • Page 5 Ernitec EDNS V3000 series – user manual 3.6.5.3 Alert IP .................. 46 3.6.5.4 Alert Port ................46 3.6.5.5 Alert Interval ................46 3.6.6 Event Full Screen ................. 46 3.6.7 Event Duration ..................46 3.6.8 Per Channel Config ................48 3.6.8.1 Channel Select ..............
  • Page 6 Ernitec EDNS V3000 series – user manual 4.4.2.1 ezBurn Introduction ..............78 4.4.2 Export Normal Video ................80 4.4.3 Export Event Video ................80 Dome Control ..................... 82 4.5.1 Dome Connection ................. 82 4.5.2 Dome Protocol Setup ................82 4.5.3 RS485 Setup ..................

  • Page 7: Overview

    Ernitec EDNS V3000 series – user manual Overview Ernitec EDNS V3000 is an integrated digital video recorder that combines the features of a time-lapse audio / video recorder, a multiplexer, and a video server to create a single security solution.

  • Page 8: System Setup

    Ernitec EDNS V3000 series – user manual System Setup The notices and introduction on system installation will be described particularly in this chapter. Please follow the description to operate the unit. In order to prevent the unit from data loss and system damage...
  • Page 9 Ernitec EDNS V3000 series – user manual Connecting Short-term Device If any short-term devices shall be installed to the DVR as parts of the unit system, such as USB ThumbDrive® or any USB devices, etc, make sure those devices are connected only after the unit is powered up.

  • Page 10: Rear Panel Connections

    Ernitec EDNS V3000 series – user manual Rear Panel Connections There are various connectors on the rear panel for the DVR installations. For different models, the connectors vary accordingly. Refer to Setup Guide for actual provided connectors. The following shows the detailed description of each connector.
  • Page 11 Ernitec EDNS V3000 series – user manual Video out connectors are provided for looping out the video sources of the connected cameras. Audio Out – Main & Call (selected models only) Main & Call Audio Out RCA connectors are provided for connecting the DVR to audio output devices (e.g.
  • Page 12 Ernitec EDNS V3000 series – user manual models. Alarm Out (selected models only) Some models provide a terminal block for connection to alarm output devices. Refer to Setup Guide for detailed pin definitions for different models. LAN Connector (RJ-45) The DVR is capable of networking. Once the unit is connected to the LAN network, users can remotely access the unit through the remote software on a PC.
  • Page 13 Ernitec EDNS V3000 series – user manual Power Jack (selected models only) Connect the power cord shipped with the unit. Use of other power supply cords may cause overloading. V 2.2.082012 www.ernitec.com...

  • Page 14: General System Setup

    Ernitec EDNS V3000 series – user manual General System Setup Before operating the DVR, some general configuration should be setup first. The following subsections will introduce function keys on the front panel and general configuration of the DVR. The regular displayed OSD information and its displayed positions are shown as following figure.
  • Page 15 Ernitec EDNS V3000 series – user manual Network LED The LED lights up when the DVR is connected to a network and blinks when the data is being transferred. V 2.2.082012 www.ernitec.com...

  • Page 16: Function Keys

    Ernitec EDNS V3000 series – user manual 3.1.2 Function Keys This section describes the functional keys on the front panel of the DVR. Refer to the Setup Guide for the graphical illustration of functional keys. Power Key When the quick shutdown function is enabled, press and hold this key to quick shutdown the DVR.
  • Page 17 Ernitec EDNS V3000 series – user manual COPY In Playback mode, press COPY to select the start and end time of the export video. Refer to section Video Export for detailed information. CALL (Spot) In Live mode, press this button to enter call monitor control mode.
  • Page 18 Ernitec EDNS V3000 series – user manual PLAY/STOP Press this key to switch between live image and playback video. NOTE: According to record setting, part of the latest video cannot be played back because the video is still saved in the buffer.
  • Page 19 Ernitec EDNS V3000 series – user manual move the cursor to previous or next fields. To change the value in the selected field, press UP/ DOWN keys. ENTER / ZOOM  In OSD setup menu or selection interface, press this key to make the selection or save settings.

  • Page 20: Enter Osd Setup Menu

    Ernitec EDNS V3000 series – user manual Enter OSD Setup Menu The configuration of the DVR can be customized by entering the intuitive Graphical User Interface (GUI) OSD setup menu. Collaborating with a USB mouse, setting up the DVR can be easy as operating on a PC.
  • Page 21 Ernitec EDNS V3000 series – user manual Password Protection Select <On> to request for username and password for accessing functions listed in Authority Setup menu, or select <Off> to allow free access. V 2.2.082012 www.ernitec.com...

  • Page 22: Power Up / Shutdown The Dvr

    Ernitec EDNS V3000 series – user manual Account Setup Setup customized account, password, and privilege level in this menu. Note that the account is case sensitive, and password cannot contain the number “0”. The privilege level rank from levels 1~8, which level 8 has the highest privilege. Alternatively, select <Disable>...
  • Page 23 Ernitec EDNS V3000 series – user manual Simply plug in the power adapter that came with the package and the DVR will start to boot. The color bar and system checking information will be shown on the monitor and then disappear when the unit has been completely powered up.
  • Page 24 Ernitec EDNS V3000 series – user manual Restart / Shutdown the Unit Press MENU and input the username and password that has sufficient authority to access the OSD setup menu. Select <Shutdown> in Main Menu and press ENTER to enter the Shutdown menu, which displays as follows.
  • Page 25 Ernitec EDNS V3000 series – user manual function without any confirmation or login process, select this option and the DVR will automatically shutdown after long pressed the Power Key.  Disable: Select this option to disable the quick shutdown function.

  • Page 26: Hdd Auto Scan

    Ernitec EDNS V3000 series – user manual 3.3.1 HDD Auto Scan When the DVR is powering on, HDD auto scan will be initiated if there was previously an unusual power loss or file system error. If by any chance auto scan failed, the HDD will need to be formatted.

  • Page 27: System Date / Time Setting

    Ernitec EDNS V3000 series – user manual System Date / Time Setting Users can set the current date, time and other OSD parameters in Date/Time menu (under System Setup menu). The login account should have authority to access the System Setup menu.

  • Page 28: Daylight Saving Time

    Ernitec EDNS V3000 series – user manual Date Display Mode This function allows users to set the OSD display type of the date. There are three options to select from: <Y/M/D>, <M/D/Y> or <D/M/Y>. “Y” represents “Year”, “M” represents “Month” and “D”...
  • Page 29 Ernitec EDNS V3000 series – user manual V 2.2.082012 www.ernitec.com...

  • Page 30: Network Time Protocol Setup

    Ernitec EDNS V3000 series – user manual 3.4.3 Network Time Protocol Setup Time Zone Select <Time Zone> to setup the time zone. To find out the correct local time zone, please visit www.greenwichmeantime.com or refer to below figure. NOTE: The <Time Zone> must be set to the correct local time zone or the <Network Time Protocol Setup>...
  • Page 31 Ernitec EDNS V3000 series – user manual automatically synced once an hour. V 2.2.082012 www.ernitec.com...

  • Page 32: Record Schedule / Quality Setting

    Ernitec EDNS V3000 series – user manual Record Schedule / Quality Setting The Record Setup menu allows users to set recording quality, recording schedules, and other recording parameters. Login with a proper account to access Record Setup menu. In the Main menu, move the cursor to <Record Setup>...
  • Page 33 Ernitec EDNS V3000 series – user manual It is strongly suggested to use VBR encoding when reliable video quality is the top priority. V 2.2.082012 www.ernitec.com...

  • Page 34: Schedule Setup

    Ernitec EDNS V3000 series – user manual NOTE: Since a VBR file does not have a fixed size, the HDD space usage cannot be calculated and thus ezRecord function is not supported for VBR mode. Therefore, if ezRecord is selected as the preset record...
  • Page 35 Ernitec EDNS V3000 series – user manual Halfl-D1 mode (NTSC: 720*240@240PPS; PAL: 720*288@200PPS) Normal PPS Normal Size Event PPS Event Size 15 NTSC 30 NTSC 10 KB / PIC 10 KB / PIC (12.5 PAL) (25 PAL) V 2.2.082012 www.ernitec.com...

  • Page 36: Per Camera Configuration

    Ernitec EDNS V3000 series – user manual 3.5.4 Per Camera Configuration This function is used to set the Day / Night / Weekend PPS (Picture per Second) and Quality for each channel. The Preset Configuration must be set to <OFF> for accessing these schedules.
  • Page 37 Ernitec EDNS V3000 series – user manual V 2.2.082012 www.ernitec.com...

  • Page 38: Ezrecord Setup

    Ernitec EDNS V3000 series – user manual 3.5.6 ezRecord Setup This item aims to ease the complicated record settings, and to make the setup much easier. Note that the item can be reached only when <ezRecord> is selected as the option for <Preset Config>.
  • Page 39 Ernitec EDNS V3000 series – user manual NOTE: The current number of connected cameras will affect the recording quality automatically calculated through the <ezRecord Setup>. Therefore, once the number of connected cameras is changed, the <ezRecord Setup> should be reset.

  • Page 40: Data Lifetime Setup

    Ernitec EDNS V3000 series – user manual 3.5.7 Data Lifetime Setup Data Lifetime indicates the duration that a video is saved and recallable in the HDD. Only those video recorded within Data Lifetime can be displayed on the screen and played back. The video exceeded Data Lifetime will be hidden and cannot be retrieved for playback.
  • Page 41 Ernitec EDNS V3000 series – user manual be accessible. Enter this menu and users can setup data lifetime of each channel independently. The value ranges from <1> to <365> days. Alternatively, select <0> to disable this function. V 2.2.082012 www.ernitec.com...

  • Page 42: Circular Recording

    Ernitec EDNS V3000 series – user manual 3.5.8 Circular Recording Users can choose to record video in circular mode or in linear mode. If circular mode is selected, the DVR will stores new video into the HDD spaces while overwrite the oldest recorded video.
  • Page 43 Ernitec EDNS V3000 series – user manual Purge All Event Data The item is used to delete all event video from database(s). Using UP / DOWN keys to select <Yes> and start the deletion by setting <Start To Purge> to <Yes>.

  • Page 44: Event Setting

    Ernitec EDNS V3000 series – user manual Purge Event Before The item is used to delete event video before a specific date. Use LEFT / RIGHT keys to move the cursor to next or previous field, ENTER to select the item and UP / DOWN to adjust the value.
  • Page 45 Ernitec EDNS V3000 series – user manual icons and event types. Event Icon Event Type Alarm in event Motion detection event Video loss event V 2.2.082012 www.ernitec.com...

  • Page 46: Email Notice

    Ernitec EDNS V3000 series – user manual 3.6.3 Email Notice The item enables (On) / disables (Off) the Email notification of an event. When an alarm event is triggered and <Email Notice> is enabled, an email regarding the alarm event will be sent.

  • Page 47: Alert Notification

    Ernitec EDNS V3000 series – user manual 3.6.5.2 Alert Notification 4 options are included in this item: <OFF>, <Event>, <Alive>, and <Both>. <OFF>: The Alert Notification is turned off. <Event>: When the alarm is triggered, the DVR will send an alert message to the CMS.
  • Page 48 Ernitec EDNS V3000 series – user manual duration range is from 5 second to 999 seconds. V 2.2.082012 www.ernitec.com...

  • Page 49: Per Channel Config

    Ernitec EDNS V3000 series – user manual 3.6.8 Per Channel Config This menu is used to configure the <Video Loss Detect>, <Motion Detect>, <Alarm In> and <Alarm Out> settings for each channel. The menu is displayed as below. Per Channel Config...
  • Page 50 Ernitec EDNS V3000 series – user manual Detection Config Detected Area Setup ENTER Sensitivity Block Threshold V 2.2.082012 www.ernitec.com...

  • Page 51: Alarm In

    Ernitec EDNS V3000 series – user manual Detected Area Setup After selected this item, the detected area is displayed as follows. The detection area consists of 192 (16×12) detection grids. Use the Direction keys to move the cursor and press ENTER to select or de-select a grid.
  • Page 52 Ernitec EDNS V3000 series – user manual select <OFF> to disable the detection. If <N/C> is selected without installing any device, an alarm will be triggered and the Event Icon will always display on the monitor until the selection is changed to <N/O> or <OFF>, or when a device is installed.

  • Page 53: Alarm Out

    Ernitec EDNS V3000 series – user manual 3.6.8.6 Alarm Out This item allows users to enable/ disable the alarm output on the selected channel to activate the relay. The signal can be a light or siren to caution an alarm event. Select <ON> to enable the alarm output, or <OFF>...
  • Page 54 Ernitec EDNS V3000 series – user manual V 2.2.082012 www.ernitec.com...

  • Page 55: Exception Pos Setup

    Ernitec EDNS V3000 series – user manual 3.7.3 Exception POS Setup This sub-menu is used to define the conditions that are to be treated as an “Exception” and thus trigger an action (the function will be implemented later). Exception POS Setup Exception No.
  • Page 56 Ernitec EDNS V3000 series – user manual <Greater Equal Than>: When the value of a transaction is greater then or equal to a certain value, it will be marked as an exception. That specific value need to be defined in the following sub-setting <Value>.

  • Page 57: Input Setup

    Ernitec EDNS V3000 series – user manual <Inside The Range>: When the value of a transaction is within a certain range, it will be marked as an exception. The range need to be defined in the following sub-setting <Value> and <Value (Upper Limit)>.
  • Page 58 Ernitec EDNS V3000 series – user manual Text Filter This item is used to choose the text filter. The supported models for pole display and printer are listed as below. Pole Display Printer POS Machine Cache Technology Citizen CBM-1000 II...
  • Page 59 Ernitec EDNS V3000 series – user manual Text Baud Rate, Bit, Stop, Parity These are used to setup the baud rate, bit, stop, and parity of RS232 which connects the POS device and DVR. V 2.2.082012 www.ernitec.com...

  • Page 60: Basic Operation

    Ernitec EDNS V3000 series – user manual Basic Operation The DVR allows users to access some general operations through the front panel easily. The following sections introduce the general operations of the unit. View Live / Playback Video The general functions in live and playback mode are described in the following sections.
  • Page 61 Ernitec EDNS V3000 series – user manual NOTE: 3x3 viewing mode is only available in 8CH and 16CH models, whereas 4x4 viewing mode is only available in 16CH models. V 2.2.082012 www.ernitec.com...

  • Page 62: Digital Zoom

    Ernitec EDNS V3000 series – user manual 4.1.2 Digital Zoom Users are able to view a 2× full screen in live mode. To view the 2× full screen, follow the steps.  Press any CHANNEL key to view the corresponding camera in full screen.
  • Page 63 Ernitec EDNS V3000 series – user manual key to switch on “deflicker function” to avoid gleaming of images. Press SEQ again to switch “deflicker off” and the image will return to real D1 resolution. The Forward or Reverse speed indicator will be shown on the bottom-left corner of the screen, when in the playback mode.
  • Page 64 Ernitec EDNS V3000 series – user manual The general operations in playback mode are described as follows. Key Usage in Playback The key usage is slightly different in playback mode. Following is the key usage found in playback mode. ...

  • Page 65: Sequence

    Ernitec EDNS V3000 series – user manual Sequence This section introduces the way to view sequence mode with both Main Monitor and Call Monitor, if connected. Sequence function can avoid manual backtracking and provides more flexibility while monitoring surveillance. 4.2.1 Sequence with Main Monitor Automatic sequence function can be observed in any view mode.
  • Page 66 Ernitec EDNS V3000 series – user manual  Press CHANNEL key to display the associated camera on call monitor.  Alternatively, press SEQ repeatedly to display the sequence of cameras previously programmed in Call Monitor Schedule menu.  Press ESC to return the front panel to Main Monitor Control mode.

  • Page 67: Search Recorded Video

    Ernitec EDNS V3000 series – user manual Search Recorded Video The DVR is capable of searching and playing back recorded video by date / time, events, or text. To search by time, select a specific date and time of the wanted video or enter Calendar Search.
  • Page 68 Ernitec EDNS V3000 series – user manual NOTE: If there is no available recorded video that matches the specified time and date, the unit starts playback from the next available video. V 2.2.082012 www.ernitec.com...

  • Page 69: Calendar Search

    Ernitec EDNS V3000 series – user manual NOTE: The date/time information will be shown on the screen with a DST icon if the Daylight Saving Time function is enabled. “S” indicates summer time and “W” indicates winter time. 4.3.2 Calendar Search Follow the steps below to search recorded video via Calendar Search.
  • Page 70 Ernitec EDNS V3000 series – user manual  Note that the time blocks highlighted in red represent events occurred.  Select <Begin Playback> and press ENTER to start playing back selected video. V 2.2.082012 www.ernitec.com...

  • Page 71: Search By Event

    Ernitec EDNS V3000 series – user manual 4.3.3 Search by Event “Event List” allows users to search wanted video by event. The Event List is displayed as below figure: Event List First Page Date Time Type 2011/03/17 11:26:50 Motion 2011/03/17...

  • Page 72: Search By Text

    Ernitec EDNS V3000 series – user manual 4.3.4 Search by Text When a POS device is connected to the DVR, users can search for videos with text data. The “Text Query Page” is displayed as below: Text Query Page By Text...
  • Page 73 Ernitec EDNS V3000 series – user manual  Less Equal Than: Enter one number. Search for videos with data containing number(s) less than or equal to the specific number.  Greater Equal Than: Enter one number. Search for videos with data containing number(s) greater than or equal to the specific number.

  • Page 74: Video Export

    Ernitec EDNS V3000 series – user manual Video Export The following sections will show how to export video through the OSD setup menu and through the hot keys on the front panel, respectively. Note that the system log will keep records of all video exportations, including duration, start time, and end time.

  • Page 75: Select The External Device

    Ernitec EDNS V3000 series – user manual 4.4.1.1 Select the External Device The available external devices for exporting video will be listed by name and free size in Select Device menu. The Select Device menu displays as follows. Select Device...
  • Page 76 Ernitec EDNS V3000 series – user manual and time value by UP / DOWN keys. Select Events Select this item to display the event list. Move the cursor to scroll through the event list and press ENTER to select event(s) to be exported.

  • Page 77: Digital Signature

    Ernitec EDNS V3000 series – user manual Data Type The item is used to select exporting video type. The options are <Normal> (export normal video only), <Event> (export event video only) and <Both> (export both normal and event video). Export Format This item is for selecting exporting video format.

  • Page 78: Erase Disc

    Ernitec EDNS V3000 series – user manual 4.4.1.4 Erase Disc This function is used to remove data found on a DVD+RW disk prior to exporting new information to the drive. Select <Yes> and press ENTER to start deleting data. V 2.2.082012...

  • Page 79: Quick Video Export Through Front Panel

    Ernitec EDNS V3000 series – user manual 4.4.2 Quick Video Export through Front Panel Through front panel control, the DVR allows users to easily export wanted video as *.drv file with the built-in DVD+RW or to an external device, such as a USB ThumbDrive, and the exported video will be saved as *.drv file.
  • Page 80 Ernitec EDNS V3000 series – user manual sections. NOTE: The file exported using ezBurn will be in .drv file format, and it can only be played using the remote player software. V 2.2.082012 www.ernitec.com...

  • Page 81: Export Normal Video

    Ernitec EDNS V3000 series – user manual 4.4.2 Export Normal Video To Export normal video to external device, follow these step:  Press SEARCH and play wanted normal video by entering date and time. Note if the screen is showing in multiple channel mode, please make sure there is no window displaying in Live mode, or the export will not work.
  • Page 82 Ernitec EDNS V3000 series – user manual ezBurn confirmation Selected Device: USB Storage Device Exported Required Size = 11 MB Export Event Info: Data Time Type 2011/05/07 AM10:42:35 Motion ENTER: YES ESC: NO V 2.2.082012 www.ernitec.com...

  • Page 83: Dome Control

    Ernitec EDNS V3000 series – user manual  If there is no any exportable device connected to the DVR unit, a warning message will be shown on the screen  Press ENTER to start the export the whole event video to the connected device;...
  • Page 84 Ernitec EDNS V3000 series – user manual communications protocol associated with dome camera using the Direction keys and ENTER. NOTE: The settings become effective after saving the changes and exiting from the menu. V 2.2.082012 www.ernitec.com...

  • Page 85: Rs485 Setup

    Ernitec EDNS V3000 series – user manual 4.5.3 RS485 Setup The DVR controls the domes via RS-485 communication protocol. The RS-485 parameters in the DVR must be set to the same parameters set in dome camera. Users are allowed to change the RS-485 settings of the DVR.
  • Page 86 Ernitec EDNS V3000 series – user manual V 2.2.082012 www.ernitec.com...
  • Page 87 Ernitec EDNS V3000 series – user manual Focus Far Click on it to focus the lens of selected dome camera at a farther point. Focus Near Click on it to focus the lens of selected dome camera at a nearer point.
  • Page 88 Ernitec EDNS V3000 series – user manual Please refer to Setup Guide for the graphical illustration of functional keys. V 2.2.082012 www.ernitec.com...

  • Page 89: Set Preset Points

    Ernitec EDNS V3000 series – user manual 4.5.5 Set Preset Points The DVR allows users to set preset positions. The amount of preset points depends on the dome manufacturer. Follow the steps to set preset points.  Press a Channel key to view the corresponding camera in full-screen.
  • Page 90 Ernitec EDNS V3000 series – user manual the selected dome camera will rotate to the preset position automatically. V 2.2.082012 www.ernitec.com...

  • Page 91: Run Dome Camera Tour

    Ernitec EDNS V3000 series – user manual 4.5.7 Run Dome Camera Tour Users can also display dome camera tour setup at the dome camera side. Follow the steps to run display of dome camera tour.  Press a Channel key to view the corresponding camera in full-screen.

  • Page 92: Remote Monitoring Software

    Ernitec EDNS V3000 series – user manual Remote Monitoring Software The remote monitoring software is a remote browser-based software application designed to operate with the DVR products. Using the software, users are allowed to view live and recorded video, and configure the DVRs remotely via a LAN, WAN or Internet on a personal computer.
  • Page 93 Ernitec EDNS V3000 series – user manual Hard Disk Drive Requires 20 MB for software installation Operating Windows Windows Vista, System Windows 7 Microsoft Internet Explorer version 6.0 or Web Browser above Monitor Minimum 1024 x 768 with 16-bit color...

  • Page 94: Installation Of Software

    Ernitec EDNS V3000 series – user manual Installation of Software Refer to the following description to install the remote monitoring software. 5.2.1 Change Internet Settings The PC operating with the remote monitoring software should be set to accept ActiveX plug-ins. Please follow the steps to set the Internet security settings appropriately.
  • Page 95 Ernitec EDNS V3000 series – user manual V 2.2.082012 www.ernitec.com...
  • Page 96 Ernitec EDNS V3000 series – user manual  Uncheck “Require server verification (https:) for all sites in this zone”. Type the IP address of the unit in field and click <Add> to add this web site to the zone.  Click <OK> to confirm the setting and close Trusted sites dialog.
  • Page 97 Ernitec EDNS V3000 series – user manual  Click <OK> to apply the setting and close the <Security Settings> screen.  Click <OK> to close Internet Options dialog. Now the installation can continue to the next step. V 2.2.082012 www.ernitec.com...

  • Page 98: Install The Remote Monitoring Software

    Ernitec EDNS V3000 series – user manual 5.2.2 Install the Remote Monitoring Software Start the browser to initiate the installation of the remote monitoring software on the PC. The IP address of the DVR can be saved as a Favorites item in the web browser to enable easy access in the future.
  • Page 99 Ernitec EDNS V3000 series – user manual V 2.2.082012 www.ernitec.com...

  • Page 100: Login / Logout

    Ernitec EDNS V3000 series – user manual 5.2.2.1 Login / Logout Login using the same accounts setup in the DVR. The authority is also the same as setup in the DVR. One preset account “admin” and up to two other accounts can access a DVR at the same time.

  • Page 101: Software Upgrades

    Ernitec EDNS V3000 series – user manual 5.2.2.2 Software Upgrades If a new version of the remote monitoring software is available on the DVR, upgrade will be prompted while accessing the unit. Follow the steps to upgrade the software.  The message as the above figure will be prompted. Click <Yes>...
  • Page 102 Ernitec EDNS V3000 series – user manual operation can be accessed. To choose desired display mode and to operate dome camera control, refer to the following sections. V 2.2.082012 www.ernitec.com...

  • Page 103: Select Display Mode

    Ernitec EDNS V3000 series – user manual 5.3.1.1 Select Display Mode Choose the number of windows to be displayed on the main window. Click one of the display buttons in MODE section. Available selections are 4, 9 and 16 camera displays. To view certain window in full screen, either double-click on the wanted window, or click on the corresponding CAMERA button.
  • Page 104 Ernitec EDNS V3000 series – user manual required to access this function. V 2.2.082012 www.ernitec.com...

  • Page 105: Instant Recording

    Ernitec EDNS V3000 series – user manual Focus +/− Use these buttons to adjust the camera lens to focus on objects for a clear view. Click on <Focus +> to focus near or <Focus −> to focus far. Iris +/−...

  • Page 106: Playback Instant Recorded Video

    Ernitec EDNS V3000 series – user manual 5.3.2.2 Playback Instant Recorded Video Follow the steps to playback a video recorded by “Instant Recording”.  Click <Play> on main window toolbar and click <Local Playback> tab.  Click <Open> to choose a recorded file.

  • Page 107: Playback Video

    Ernitec EDNS V3000 series – user manual 5.3.3 Playback Video The remote monitoring software allows users to view recorded video either from the DVR, or from the hard disk drive of the PC To access the Playback screen, click <Play> button on the main window toolbar.
  • Page 108 Ernitec EDNS V3000 series – user manual calendar; then click the left and right arrow at the top of the calendar to change the date. Use up and down arrow next to the time field to change to the wanted time.

  • Page 109: Playback Local *.Drv Files

    Ernitec EDNS V3000 series – user manual  The other option <Download (.DRV)> in <Select> field enables users to download the video segment of selected date and time to the PC. The selection of time duration is the same as described above. Files downloaded will be in *.drv format.
  • Page 110 Ernitec EDNS V3000 series – user manual or 32×. 2. When playback is paused, click repeatedly to move forward step-by-step. V 2.2.082012 www.ernitec.com...

  • Page 111: Verify Digital Signature

    Ernitec EDNS V3000 series – user manual 5.3.4 Verify Digital Signature The digital signature aims to authenticate a video file exported from the unit. Follow the description to verify the digital signature.  Click <Play> on the main window toolbar.

  • Page 112: Take A Snapshot

    Ernitec EDNS V3000 series – user manual 5.3.6 Take a Snapshot Snapshot is a simple screen capture tool. When users click on the SNAPSHOT button, it will capture the screenshot of the window that is currently showing on the screen. Each click captures one screenshot to be saved as a JPEG file on the desktop.

  • Page 113: Remote Monitoring Software Troubleshooting

    Ernitec EDNS V3000 series – user manual 5.3.8 Remote Monitoring Software Troubleshooting What happened if the server requests to upgrade the software every time the DVR is connected? If the following screen displays repeatedly, please follow the steps to delete the temporary internet files.
  • Page 114 Ernitec EDNS V3000 series – user manual  Check the <Delete all offline content> box and click <OK>.  Now, enter the IP address of the DVR to make the connection again. V 2.2.082012 www.ernitec.com...

  • Page 115: Appendix A: Recommended Hdds

    Ernitec EDNS V3000 series – user manual Appendix A: Recommended HDDs Refer to the following list for some recommended HDDs to be used in the DVR. Brand Model Name Model Number Size Pipeline HD.2 ST3500312CS 500G Barracuda ES.2 ST3500320NS 500G Barracuda 7200.11...

  • Page 116: Appendix B: Remote Controller

    Ernitec EDNS V3000 series – user manual Appendix B: Remote Controller The operational function keys on the remote control are listed as below figure: V 2.2.082012 www.ernitec.com...
  • Page 117 Ernitec EDNS V3000 series – user manual V 2.2.082012 www.ernitec.com...
  • Page 118 Ernitec EDNS V3000 series – user manual The keys of the remote control function as the keys of the front panel of the DVR. The only difference between the remote control and the front panel keys is the “DVR SEL” key. The DVR Selection key is used to switch control between each DVR.

  • Page 119: Appendix C: Setup A Dvr Behind A Router

    Ernitec EDNS V3000 series – user manual Appendix C: Setup a DVR behind a Router This appendix describes how to set up a router if the DVR connects to the internet via a router. To properly operate a web server, e.g. a DVR, users have to set up both the IP and port of the DVR, which are essential for data and command transmission.
  • Page 120 Ernitec EDNS V3000 series – user manual V 2.2.082012 www.ernitec.com...
  • Page 121 Ernitec EDNS V3000 series – user manual Following is an example of how the router should be set. Router DVR 1 DVR 2 (D-Link DI-724P+) IP: 192.168.0.100 IP: 192.168.0.167 IP: 192.168.0.200 WAN IP: Trigger port: 80 Trigger port: 81 218.160.54.13 LAN IP: 192.168.0.1...
  • Page 122 Ernitec EDNS V3000 series – user manual V 2.2.082012 www.ernitec.com...
  • Page 123 Ernitec EDNS V3000 series – user manual Select <Enabled> to set up the service. Enter the name of the setting in the Name field: DVR 1. Enter Private IP: 167 Choose <TCP> as the Protocol Type. Enter Private Port: 80.
  • Page 124 Ernitec EDNS V3000 series – user manual V 2.2.082012 www.ernitec.com...

Table of Contents