Functional Check Of The Battery- Powered Clipping Machine Fav5 Cl/Fortis - B. Braun GT300 Instructions For Use/Technical Description

Note
Switch off the battery-powered clipping machine
FAV5 CL/FORTIS before charging!
Note
Li-ion batteries heat up slightly during charging.
Note
Unplug the mains power cord at the mains socket when
the charger is not going to be used!
To connect charger 4: Plug in the device plug of
mains power cord 5 in charger 4.
Plug in the mains plug of mains power cord 5 at
the mains power socket.
Place Li-ion battery 8 in charging bay 6 of the
charger 4 and charge.
- or -
Place battery-powered clipping machine FAV5 CL/
FORTIS 2 in charging bay 10 of the charger 4 and
charge.
Charge state indicator 7 or 9 lights up red.
After charging, the charge state indicator 7/9
shines green and the battery-powered clipping
machine FAV5 CL/FORTIS 2/Li-ion battery 8 is
ready for operation.
4.2 Functional check of the battery-
powered clipping machine FAV5 CL/
FORTIS
Carry out a visual inspection.
Check the switch position.
Install the battery, see Chapter Changing the Li-ion
battery.
Mount the blade correctly and lubricate it if neces-
sary, see Chapter Safe handling blade.
Keep a charged Li-ion battery on hand, as reserve.
Clean battery-powered clipping machine FAV5 CL/
FORTIS prior to use, see Chapter Cleaning/disinfec-
tion.
7