Advertisement
40
Fitting Ball Bearing Runners
www.youtube.com/watch?v=yG4xtiJJeSg
x 4
L
Warning: Use a Screwdriver
to position the Runners as
they could have sharp edges
Starting with the Bottom Drawer, slide both its Runners forward and locate the Drawer Sides
between them, lining up the holes in the Drawer Sides with the 2nd 'threaded' holes in the
Runners.
Working from the inside of the Drawer, insert 2 Screws through the Drawer Sides and out into
the 2nd threaded hole in the Runner.
Note: Do not overtighten the Screws.
If they catch on the runner you may need to loosen them slightly.
Advertisement
