Related Manuals for Habitat Compton 920/0698
Summary of Contents for Habitat Compton 920/0698
- Page 1 Compton Spare Parts Customer Support 0345 640 2020 www.argos-support.co.uk Help@ClickSpares.co.uk 0370 112 1928 Issue 1 - 16/09/20...
- Page 2 Safety and Care Advice Product Details Compton Glass Display Unit 920/0698 Black 938/1892 White IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. Keep children and animals Assemble the item as close We do not away from the work area, small recommend the parts could choke if swallowed.
-
Page 3: Table Of Contents
Fittings (Shown to scale) Bag 1 1.2 x 20mm Nail x 22 5 x 50mm Screw x 16 4 x 30mm Screw x 8 12 x 10.5mm Locking Nut x 4 7 x 39mm Locking Pin x 4 6 x 30mm Dowel x 14 4 x 18mm Shelf Support x 12 4 x 12mm Support Cover x 12 3 x 12mm... - Page 4 Tools required Phillips screwdriver Ruler/tape (small & medium) measure Phillips screwdriver Eye protection (small & medium) (when using a hammer or glue) Small hammer Power Drill Large hammer Pencil Drill Heads Mallet Set Square Spirit Level...
- Page 5 Panels 1 Top/Bottom (389 x 284mm) 2 Bottom Front Support (389 x 89mm) 3 Fixed Shelf (389 x 284mm) 4 Shelf (389 x 284mm) 8 Left Side 7 Right Side (286 x 1800mm) (286 x 1800mm) 5 Bottom Back Support (389 x 89mm) 6 Plinth (389 x 59mm)
- Page 6 Panels 10 Drawer Front (416 x 180mm) Drawer Back (357 x 106mm) 15 Upper Back (798 x 415mm) Drawer Right (240 x 106mm) Drawer Left (240 x 106mm) 9 Door (418 x 1369mm) Drawer Bottom (366 x 236mm) 16 Lower Back (938 x 415mm)
- Page 7 1.2 x 20mm Nail x 22 5 x 50mm Screw x 16 4 x 30mm Screw x 8 7 x 39mm Locking Pin x 4 6 x 30mm Dowel x 14 12 x 10.5mm Locking Nut x 4 6 x 30mm Dowel x 2 4 x 14.5mm Screw x 4 4 x 18mm Shelf Support x 12 4 x 12mm Support Cover x 12...
- Page 8 3 x 12mm Screw x 12 246mm Runner x 4 3.5 x 15mm Screw x 6 Door Hinge x 3 Finished edge Finished edge 1.7cm...
-
Page 9: 20Mm Nail X
5 x 50mm Screw x 16 Unfinished edge 1.2 x 20mm Nail x 22 Unfinished surface... -
Page 10: Wall Strap X 2
4 x 33mm 4 x 18mm Shelf Support x 12 4 x 12mm Support cover x 12 Screw x 2 4 x 14.5mm Screw x 2 Wall Strap x 2 Wall Plug x 2 Wall hole TOP PANEL Rotate Product... -
Page 11: Screw Cover X 16
Screw cover x 16 Finished edge 7 x 39mm Locking Pin x 4 Repeat... -
Page 12: X 30Mm Screw X
6 x 30mm Dowel x 4 12 x 10.5mm Locking Nut x 4 Repeat 4 x 30mm Screw x 8 Unfinished bottom surface Repeat Repeat... - Page 13 3.9 x 12mm Screw x 4...
- Page 14 Door Hinge x 3 3.5 x 15mm Screw x 6 7 x 1.5mm Door Pad x 2 Insert into plate If needed, rotating screw clockwise if it is hard to insert Press to Unclip Rotate Product...
- Page 15 Hinges Adjustment...
- Page 16 A Guide to - Wall Mounting & Fixings Important: When drilling into walls always Important note: check that there are no hidden wires or pipes etc. If plastic wall plugs Make sure that the screws and wall plugs being used are supplied with your are suitable for supporting your unit.