Advertisement
31
x 2
N
Carefully stand the unit up and
push it up against the wall.
Loosely fit the 1st screw
through the brackets into the
top panel.
Slide the brackets against the
wall and mark the slot at the
back of the brackets for drilling
into the wall.
Swivel the brackets away from
the wall and drill the wall using
a suitable drill-bit and fit your
wall fixings (wall fixings are not
supplied as they will need to
suit the wall type).
Swivel the brackets back and fix
them to the wall.
Fit the 2nd screw into top panel
and tighten both screws from
the kits.
Note: Take care when drilling
the wall that you do not drill
into any pipes, wires etc.
If in doubt, consult an expert.
WARNING!
In order to prevent overturning
this product must be used with the
2 wall attachment devices provided
See the next section for a guide
to wall mounting and fixings
Advertisement
