Related Manuals for Habitat Compton 930/6712
Summary of Contents for Habitat Compton 930/6712
- Page 1 Compton Spare Parts Customer Support 0345 640 2020 www.argos-support.co.uk Help@ClickSpares.co.uk 0370 112 1928 Issue 1 - 16/09/20...
- Page 2 Safety and Care Advice Product Details Compton Pull Down Shoe Cabinet x 4 930/6712 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. Keep children and animals Assemble the item as close We do not away from the work area, small recommend the parts could choke if swallowed.
- Page 3 Fittings (Shown to scale) Bag 1 5 x 50mm Screw x 10 7 x 39mm Locking Pin x 24 SCR05050 SCR07039 6 x 30mm Dowel x 4 1.2 x 16mm Nail x 40 15 x 12mm Locking Nut x 24 PGW0630 ELSNAIL FIT1512000...
- Page 4 Tools required Phillips screwdriver Ruler/tape (small & medium) measure Phillips screwdriver Eye protection (small & medium) (when using a hammer or glue) Small hammer Power Drill Large hammer Pencil Drill Heads Mallet Set Square Spirit Level...
- Page 5 Panels 1 Top (1112 x 250mm) 10 Door (475 x 374mm) 2 Bottom (986 x 231mm) 11 Shelf (466 x 130mm) 12 Bottom Holder (466 x 82mm) 3 Right Side (790 x 182mm) 13 Small Back (480 x 110mm) 4 Left Side (790 x 182mm) 14 Bottom Support (117 x 50mm) 5 Right Front Post (920 x 50mm) 6 Left Front Post (920 x 50mm)
- Page 6 5 x 50mm Screw x 10 7 x 39mm Locking Pin x 24 SCR05050 SCR07039 6 x 30mm Dowel x 4 1.2 x 16mm Nail x 40 15 x 12mm Locking Nut x 24 7 x 39mm Locking Pin x 6 PGW0630 ELSNAIL FIT1512000...
- Page 7 15 x 12mm Locking Nut x 6 5 x 50mm Screw x 6 Two pre-drill holes near right edge. Two pre-drill holes near left edge. 7 x 39mm Locking Pin x 8 Door Catch x 4...
- Page 8 Pivot B x 4 Door Stopper x 4 7 x 39mm Locking Pin x 4...
- Page 9 5 x 50mm Screw x 2 Adjustable Leg (Bolt and Nut) x 1 5 x 50mm Screw x 2 Finished edge...
- Page 10 15 x 12mm Locking Nut x 6 15 x 12mm Locking Nut x 6 Anti-Slip Pad x 4 “Clean the surface before affixing the pads, and also stand at least 24hrs after sticking to ensure good adhesion”...
- Page 11 7 x 39mm Locking Pin x 6 4 x 14.5mm Screw x 4 Wall Bracket x 2 15 x 12mm Locking Nut x 6 Unfinished surface Rotate Product...
- Page 12 3.5 x 15mm Screw x 8 Left Bracket x 4 Right Bracket x 4 Repeat 6 x 15mm Screw x 16 Repeat...
- Page 13 3.5 x 15mm Screw x 8 Finished edge Repeat Rotate Product 6 x 15mm Screw x 4 Pivot A x 4...
- Page 14 6 x 15mm Screw x 4 Pivot A x 4 1.2 x 16mm Nail x 40 90° Rotate Product Unfinished surface...
- Page 15 4 x 33mm Catch Plate x 4 3 x 12mm Screw x 4 Screw x 2 Wall Plug x 2 Finished edge...
- Page 16 A Guide to - Wall Mounting & Fixings Important: When drilling into walls always Important note: check that there are no hidden wires or pipes etc. If plastic wall plugs Make sure that the screws and wall plugs being used are supplied with your are suitable for supporting your unit.