BASSXPANDER
Press the SND button for more than 1.5 second to switch ON/OFF of the BASS mode.
When the BASS mode is on, "BASS" is displayed and the bass enhances.
RADIO SELECTION BUTTON (BND)
Press the BND button to switch from CD player mode to radio.
Each time the button is pressed, the function changes as shown below.
FMI
FMII
CD PLAYER, CD CHANGER* OR AUX SELECTION
BUTTON (CD/AUX)
Press the CD/AUX button to switch from radio mode to CD, CD changer* or AUX mode.
Radio
CD player
Notes
• When a CD is not loaded in the CD player, the CD player mode is skipped.
• When a CD changer is not connected, the CD changer mode is skipped.
CLOCK BUTTON (CLK)
Press the CLK button to switch between the clock and audio display. When an audio function is
performed while the time display is selected, the audio display will appear for 5 seconds, then the display
will return to the time mode.
TO CANCEL THE BEEP TONES
Turn off the power by depressing the POWER button .
1
To cancel all beep tones, press the
2
3 seconds and then "b-oF" is displayed.
To turn on the beep tones again, perform the same procedure. The beep tones are set and "b-on" is dis-
3
played.
DEMO MODE ON/OFF
Turn off the power by depressing the POWER button .
1
To turn ON/OFF the demo mode, press the
2
more than 3 seconds.
DEMO ON (d-on) : Demo is displayed.
DEMO OFF (d-oF): Display is OFF.
(DEFAULT : DEMO ON)
........................................................ 3
FMIII
MW
.................................................... 5
CD changer
............................................. 6
button and the POWER button simultaneously for more than
............................................... 1, 8
........................... 4
AUX
................................. 1, 7
button and the POWER button simultaneously for
-10-
*If a CD changer is connected.