Table of Contents
Advertisement
Message
CARD ERROR
CARD FULL
THE CARD IS SET FOR
ERASURE PREVENTION
NAMING ERROR
UNIDENTIFIABLE IMAGE
TRANSFER ORDER
ERROR
PRINT ORDER ERROR
CANNOT TRANSFER!
THIS IMAGE CANNOT BE
RECORDED
TOO MANY STILL IMAGES
DISCONNECT USB CABLE
Direct Print Related Messages
NOTES
About Canon PIXMA/SELPHY DS Printers: If the printer's error indicator flashes or an error
message appears on the printer's operation panel, refer to the printer's instruction manual.
Message
PAPER ERROR
NO PAPER
PAPER JAM
INK ERROR
NO INK
A memory card error occurred. The camcorder cannot record or
display the image.
The error may be temporary. If the message disappears after 4
seconds and "
" flashes red, turn the camcorder off, remove the
card and reinsert the card. If "
continue recording/playback.
Memory card is full. Erase some images to free some space or
replace the memory card.
The write-protect switch on an SD or SDHC memory card is set to
prevent accidental erasure. Change the position of the write-protect
switch.
The folder and file numbers have reached their maximum value.
Set the [FILE NOS.] option to [RESET] and erase all the images on
the memory card or initialize it.
The image file is corrupted or it was saved using a compression
method other than that compatible with this camcorder (JPEG).
You attempted to set more than 998 transfer orders.
You attempted to set more than 998 still images in the print order.
You attempted to transfer a still image that cannot be displayed with
this camcorder.
Some analog images cannot be recorded on the memory card
depending on the signal.
Disconnect the USB cable and decrease the number of still images
on the memory card to less than 1800. If a dialog appeared on the
computer screen, close it and then restore the connection.
There is a problem with the paper. The paper is not correctly loaded or the
paper size is wrong.
Alternatively, if the paper output tray is closed, open it to print.
Paper is not correctly inserted or there is no paper.
The paper jammed during printing. Select [STOP] to cancel printing. After
removing the paper, set some paper again and retry printing.
There is a problem with the ink.
The ink cartridge is not inserted or is out of ink.
Explanation/Solution
" changes to green, you can
Explanation/Solution
Trouble?
81
–
60
–
60
62
–
71
75
–
–
–
Advertisement
Table of Contents
