Table of Contents
Advertisement
Preparations
Getting Started
Getting Started
Charging the Battery Pack
The camcorder can be powered with a
battery pack or directly using the compact
power adapter. Charge the battery pack
before use.
Remove the battery
terminal cover before
attaching the battery
1
Turn off the camcorder.
2
Attach the battery pack to the
camcorder.
• Press the battery pack lightly and
slide it down until it clicks.
BATT. switch
CHARGE
indicator
3
Plug the compact power adapter
into a power outlet.
4
Connect the compact power adapter
to the camcorder's DC IN terminal.
• The CHARGE indicator starts
flashing. The indicator will stay on
when the charging is completed.
• You can also use the compact power
adapter without attaching a battery
pack.
• When the compact power adapter is
connected, even if a battery is
attached its power will not be
consumed.
O
NCE THE BATTERY IS FULLY CHARGED
1
Disconnect the compact power
adapter from the camcorder.
2
Unplug the compact power adapter
from the power outlet.
T
O REMOVE THE BATTERY PACK
Press
to release the battery
BATT.
pack. Lift the battery pack and then
pull it out.
Getting Started
19
DC IN
terminal
Advertisement
Table of Contents
