Cycle Adjustments; Dryer Features - Frigidaire FGQ1452H Operating Instructions Manual

Cycle Selection (Con't)
Note: Using No Heat in any Auto Dry cycle will result in long
drying times and /or wet loads at the end of the cycle.
To avoid fire hazard, do not use heat to dry items
containing feathers or down, foam rubber, plastics, or similarly
textured, rubber-like materials. Use the No Heat setting only.

Cycle Adjustments

A suitable combination of dryness level and options will
automatically be displayed for each cycle. The settings can be
changed before the cycle is started. Those adjustments will
automatically be remembered each time that cycle is selected.
If a dryness level or option is not recommened for a cycle, the
indicator will not light. See the "Dryer Settings Chart" for more
details.
If changes are attempted after the cycle starts, the status lights
will blink and the signal will beep 3 times. The cycle must be
paused before the settings can be changed.
Dryness Level
To change the dryness level, press DRYNESS until the desired
selection is made. Select Normal for most loads.
Occasionally a load may seem too damp or over-dried at the end
of the cycle. To increase drying time for similar loads in the future,
select More Dry. For loads requiring less drying time, select
Less Dry.
Select Damp Dry for items you wish to partially dry before
hanging or ironing.
Towels
Estimated Cycle
Duration *** 60 minutes
Temperatures
High
Medium
Low
No Heat not recommended not recommended not recommended not recommended
Dryness Level
*
More Dry
Normal Dry
Less Dry
Damp Dry
Options
Press Saver
*
Cycle Signal
Available settings
* Factory setting
DRYER SETTINGS CHART
These temperatures, dryness levels and options are available with the following cycles:
Normal Perm Press
50 minutes 40 minutes
* *
*
* *
** Timed Dry Cycle Only
Note: To prevent over-drying, not every dryness level is available
with every cycle.
Options
To select an option, press OPTIONS until the indicator for the
desired option flashes and press Select. If an option is not
available for a cycle, the indicator will not light. Follow the same
steps to delete an option.
The Cycle Signal will sound at the end of the cycle and periodi-
cally during Press Saver.
Select Press Saver if the dried load might not be removed
promptly at the end of the cycle. The dry load will continue
tumbling without heat for 30 minutes to help reduce wrinkling.
When the Cycle Signal is selected, a beep will be heard
periodically. The load may be removed any time during Press
Saver.

Dryer Features

(Control Lock)
To avoid having someone accidentally start or stop the dryer,
press OPTIONS and Select at the same time and hold for about
10 seconds until the
(Control Lock) lights up. To unlock the controls, press and
hold OPTIONS and Select for about 10 seconds.
Status Lights
The following indicators may be lighted during the cycle:
• Drying
• Cool Down
• Press Saver
• Clean Lint Filter
•
(Control Lock)
Delicate Quick
20 minutes **
*
*
* *
*** Estimated cycle duration is based on normal
dryness level and factory settings.
Touch Up Timed Dry
15 to 90
minutes
** **
recommended
* *
PN 137102200 (0806)