LEGRAND Luxul SW-510-48P-F Setup Manual

Managed PoE Switch Setup Guide
1.
Setting up your Switch:
Place your switch in a
rack or on a desktop
3.
The default IP address method for your switch is via DHCP with a fixed
failover of 192.168.0.4. Please locate your switch IP address using your
Router's Connected Client list or similar function. Using the IP address
that you find there, login with the default credentials.
User Name: admin
Password: admin
NOTE: If your computer or device isn't set to obtain an IP address
automatically, you'll need to set a temporary static IP address on
that device. Set the IP address of your computer to an address in
the 192.168.0.X range and set your subnet mask to 255.255.255.0.
You can leave the default gateway/router IP address blank.
2.
Connect one Ethernet cable from your router or
other switch to any port on the switch. Connect
the included power cable from your switch to your
power source
NOTE: Your switches boot time will be a minimum
of 60 seconds
Router or
Switch
Front Back