The following example shows you how
to pair the earpieces with your
Bluetooth device.
1
Turn on the Bluetooth function of
your Bluetooth device, select
Philips TAA8606.
2
Enter the earpieces' password
"0000" (4 zeros) if prompted. For
those devices featuring Bluetooth
3.0 or higher, there is no need to
enter a password.
Single earpiece (mono mode)
Take either right or left earpiece out
from charging box for Mono use. The
earpiece will power on automatically.
You will hear a voice from the earpieces
saying "Power on".
Note
Take the second earpiece from the charging
case and they will pair with each other
automatically.
Philips TAA8606
Pair the earpieces with
another Bluetooth device
If you have another Bluetooth device
that you want to pair with the earpieces,
make sure the Bluetooth function in any
other previously paired or connected
devices are turned o . Then follow the
steps in 'Pair the earpieces with your
Bluetooth device for the rst time'.
Note
The earpieces stores 10 devices in the memory.
If you try to pair more than 10 devices, the
earliest paired device is replaced by the new
one.