Get Started; Charge The Battery - Philips 8000 Series User Manual

3 Get started

Charge the battery

Note
 Before you use your headphones, place them
in the charging case and charge the battery
for 3 hours for optimum battery capacity and
lifetime.
 Use only the original USB charging cable to
avoid any damage.
 Finish your call before charging. Connecting
the earpieces to charge will power them o .
Charging case
Plug one end of the USB-C cable into
the charging box and the other end into
the power source.
Tip
 The charging case serves as a portable backup
battery for charging the earpieces. When the
charging case is fully charged, it will fully
recharge the earpieces 3 times.
Earpieces
Place the earpieces in the charging case.
The earpieces start charging.
• Charging process is veri ed by white
LED light inside charging case.
• When the earpieces are fully
charged, the blue light will go o .
Tip
 Normally, a full charge takes 2 hours (for the
earpieces or charging case).
Wireless charging
(Wireless charger is not included)
The charging case has a built-in wireless
charging coil. You can charge the battery
by using a wireless charger or another
device that functions as a wireless charger.
Caution
Precautions for wireless charging
 Do not place the charging case on the wireless
charger when conductive materials, such as
metal objects and magnets, are placed
between the charging case and the wireless
charger.
 Keep the charging case away from high
temperatures and water sources. The case may
get warm during charging. This is normal.
Charging the battery with a wireless
charger.
• Place the earpieces in the charging
case
• Close the charging case cover
• Place the charging case on the center
of the wireless charger
• When fully charged, remove the
charging case from the wireless charger
Tip
 A full charge takes 5 hours by wireless charging.