Download Print this page

Advertisement

Quick Links

Instruction
Manual
2001–2005 Honda K Series
Infinity 506 and Infinity 508*
Plug & Play Adapter Harness
THIS PRODUCT HAS LEGAL RESTRICTIONS.
WARNING! THIS IS A RACE ONLY PRODUCT MANUFACTURED AND SOLD FOR INSTALLATION ON VEHICLES DESIGNED TO BE USED
SOLELY FOR COMPETITION PURPOSES. ONCE THIS PART IS INSTALLED, THE VEHICLE MAY NEVER BE USED, OR REGISTERED
OR LICENSED FOR USE, ON A PUBLIC ROAD OR HIGHWAY. IF YOU INSTALL THIS PART ON YOUR VEHICLE AND USE THE VEHICLE
ON A PUBLIC ROAD OR HIGHWAY, YOU WILL VIOLATE THE CLEAN AIR ACT AND MAY BE SUBJECT TO PERSONAL CIVIL OR
CRIMINAL LIABILITY, INCLUDING FINES OF UP TO $4,819 PER DAY.
IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS USED IN COMPLIANCE
WITH ALL APPLICABLE LAWS AND REGULATIONS. IF THIS PRODUCT WAS PURCHASED IN ERROR, DO NOT INSTALL AND/OR USE
IT. THE PURCHASER MUST ARRANGE TO RETURN THE PRODUCT FOR A FULL REFUND.
THIS POLICY ONLY APPLIES TO INSTALLERS AND/OR USERS WHO ARE LOCATED IN THE UNITED STATES; HOWEVER
CUSTOMERS WHO RESIDE IN OTHER COUNTRIES SHOULD ACT IN ACCORDANCE WITH THEIR LOCAL LAWS AND REGULATIONS.
WARNING!
Improper installation and/or adjustment of this product can result in major engine/vehicle damage. For
technical assistance visit our dealer locator to find a professional installer/tuner near you.
Note: AEM holds no responsibility for any engine damage or personal injury that results from the
misuse of this product, including but not limited to injury or death.
*See next page for important information regarding the use of this harness with Infinity 508
AEM Performance Electronics, 2205 126th Street Unit A, Hawthorne, CA 90250
P/N 30-3502
STOP!
READ THIS BEFORE INSTALLING/USING!
AEM Performance Electronics
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aemelectronics.com
Instruction Part Number: 10-3502
Document Build 1/21/2021

Advertisement

loading
Need help?

Need help?

Do you have a question about the 2001–2005 Honda K Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AEM Performance Electronics 2001–2005 Honda K Series

  • Page 1 *See next page for important information regarding the use of this harness with Infinity 508 AEM Performance Electronics AEM Performance Electronics, 2205 126th Street Unit A, Hawthorne, CA 90250 Phone: (310) 484-2322 Fax: (310) 484-0152 http://www.aemelectronics.com...
  • Page 2: Getting Started

    30-3600 UEGO Wideband O2 Sensor Extension Harness Extension harness to connect AEM UEGO Wideband O2 sensor to 6-pin Deutsch 30-3602 IP67 Logging Cable USB A-to-A extension cable: 39” long with right angled connector and bayonet style lock © 2021 AEM Performance Electronics...
  • Page 3 System from Molex. AEM strongly recommends that users become familiar with the proper tools and procedures for working with these high density connectors before attempting any modifications. The entire Molex MX123 User Manual can be downloaded direct from Molex at: http://www.molex.com/mx_upload/family//MX123UserManual.pdf © 2021 AEM Performance Electronics...
  • Page 4 The OEM Honda ECU does not have a permanent +12V power pin, so this must be sourced separate from the OEM connector and should be protected with a 5A fuse. © 2021 AEM Performance Electronics...
  • Page 5 DTM 12P wedgelock. If used, these components will need to be terminated by the installer or end user with 16 22awg wire (not included). Note: The pin – numbering is molded into the connector, as shown. © 2021 AEM Performance Electronics...
  • Page 6 AEM adapter harness. Ignition Coil Pulse 0–5V falling edge fire. Do NOT connect directly Coil 4 25 mA max source current No. 4 to coil primary. Must use an ignitor or CDI that © 2021 AEM Performance Electronics...
  • Page 7 Input Function Assignments for input switches. mapping options. 10K pullup to 12V. Will work Digital 4 - Vehicle Speed See Setup Wizard page Vehicle Speed for with ground or floating VSS#1 Sensor calibration constant. switches. © 2021 AEM Performance Electronics...
  • Page 8 10 before this input is triggered. Regulated, fused +5V supply Analog sensor power and found on auxiliary +5V_Out Sensor Voltage 1 for sensor power connector Regulated, fused +5V supply +5V_Out Sensor Voltage 2 Analog sensor power for sensor power © 2021 AEM Performance Electronics...
  • Page 9 +12V as this can permanently APP2 damage the ECU. 0–5V analog signal. Do not connect signals Ana18 - 12 bit A/D, 100K pullup to 5V referenced to +12V as this can permanently APP1 damage the ECU. © 2021 AEM Performance Electronics...
  • Page 10 Be sure that each internal coil of the stepper Automotive, Programmable motor is properly paired with the 1A/1B and Stepper_1A Stepper Driver, up to 28V and 2A/2B ECU outputs. Supports Bi-Polar stepper ±1.4A motors only. © 2021 AEM Performance Electronics...
  • Page 11 +12V UEGO1 Heat UEGO1 VM UEGO1 IP AEMNet Deutsch Pin Infinity Pin Default Pin Function CAN A+ CAN A- +12V Ground FLASH ENABLE Delphi Pin Infinity Pin Default Pin Function Permanent Power Harness Flash Enable © 2021 AEM Performance Electronics...
  • Page 12 P/N 30-3502 Honda Pin Numbering Infinity Pin Numbering Viewed From Wire Side © 2021 AEM Performance Electronics...
  • Page 13 2001–2005 Honda K Series © 2021 AEM Performance Electronics...

This manual is also suitable for:

30-3502