Quantech QCC2015CEE Installation, Operation And Maintenance Manual page 28

SECTION 3 – HANDLING AND STORAGE
Moving the condensing unit
Before moving the unit, ensure that the installation site
is suitable for installing the unit and is easily capable
of supporting the weight of the unit and all associated
services.
The units are designed to be lifted using cables. A
spreader bar or frame should be used in order to pre-
vent damage to the unit from the lifting chains.
Units are provided with lifting eyes in the sides of the
base frame, which can be attached to directly using
shackles or safety hooks.
The unit must only be lifted by the base
frame at the points provided. Never move
the unit on rollers, or lift the unit using a
forklift truck.
28
Care should be taken to avoid damaging the condenser
cooling fins when moving the unit.
Lifting weights
For details of weights and weight distribution, refer to
the data shipped in the unit information packet and unit
nameplate.
Form QCC2-NM1
Issue Date: 5/20/2021
QUANTECH