The Sensor Connector Pin Assignments For Connection To An External Device - Siensor D100 Series Passport Manual

5.1 THE SENSOR CONNECTOR PIN ASSIGNMENTS
FOR CONNECTION TO AN EXTERNAL DEVICE
1 2
5 6
Table 5.1 The LLS connector pin assignments
Pin Color
1 red
5 blue
2 white
6 brown
3 green
7 yellow
4* pink
8* grey
* The contact is used to detect disconnection of the LLS from the
cable for an external device.
3 4
7 8
Signal
PWR
GND
RS-232 TX
RS-232 RX
RS-485 A
RS-485 B
closed to pin 8 inside the connector
closed to pin 4 inside the connector
14
Fig. 5.2
The LLS cable for
connection to an external
device