Capturing A Required Part In The Video (Trimming) - JVC GZ-R15 Detailed User Manual

Capturing a Required Part in the Video
(TRIMMING)
Select the required part of a video and save it as a new video file.
The original video remains in its existing location.
0
1
Open the LCD monitor.
Check if the recording mode is A.
0
If the mode is B still image, tap B on the recording screen to display
0
the mode switching screen.
Tap A to switch the mode to video.
2
Tap M to select the playback mode.
3
Tap "MENU".
4
Tap "EDIT".
5
Tap "TRIMMING".
6
Tap the video to edit.
7
Tap e to pause playback at the desired start point, then tap "A".
When "A" is tapped, the start point is set.
0
After setting the start point, tap d to continue playback.
0
8
Tap e to pause playback at the desired end point, then tap "B".
When "B" is tapped, the end point is set.
0
To reset the start or end point, tap "A" or "B" at the desired scene
0
(position).
You can fine adjust the position by pressing l and k while
0
playback is paused.
9
Tap "SET".
When "SET" is tapped, the trimming area is confirmed.
0
10
Tap "YES".
After copying, tap "OK".
0
When copying finishes, the copied file is added to the index screen.
0
Memo :
The division point may deviate slightly from the selected scene.
0
Editing
61