Recording At Intervals (Time-Lapse Recording) - JVC GZ-R15 Detailed User Manual

Recording
Recording at Intervals (TIME-LAPSE
RECORDING)
This function enables the changes of a scene that occur slowly over a long
period to be shown within a short time by taking frames of it at a certain
interval.
This is useful for making observations such as the opening of a flower bud.
1
Open the LCD monitor.
Check if the recording mode is A.
0
If the mode is B still image, tap B on the recording screen to display
0
the mode switching screen.
Tap A to switch the mode to video.
2
Tap "MENU".
The top menu appears.
0
3
Tap "SPECIAL RECORDING".
4
Tap "TIME-LAPSE RECORDING".
Tap L to exit the menu.
0
Tap J to return to the previous screen.
0
40
5
Tap to select a recording interval (1 to 80 seconds).
The greater the number of seconds, the longer the recording interval.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
0
6
Start recording.
A frame is taken at intervals of the selected period.
0
When the recording interval is set to "20SEC INTERVAL" or higher,
0
this unit switches to the power-saving mode between recordings.
At the next point to record, the power-saving mode will be turned off
and recording will start automatically.
Settings of Time-Lapse recording are not saved when the power is
0
turned off.
Indications During Time-Lapse Recording
Display
A Recording interval Displays the recording interval that is set.
B Recorded Time Displays the actual recorded time of the video.
Recorded time increases in units of frames.
C Actual Elapsed Displays the actual elapsed time after
Time recording starts.
D Remaining Remaining time left to record with the currently
Recording Time selected video quality.
Description