Resetting This Unit; Quad Proof - JVC GZ-R15 Detailed User Manual

Getting Started

Resetting this Unit

When a malfunction occurs on this unit, reset the unit in the following way.
1
Open the terminal cover.
Remove the power cord and all connecting cables.
0
2
Close the LCD monitor to turn off this unit.
3
Press the Reset button gently using an object with pointed tip.
Caution :
Press the Reset button just once gently.
0
Do not use sharp pointed objects. It may damage the unit or cause electric
0
shock.
Memo :
If malfunction persists even after pressing the Reset button, refer to
0
"Troubleshooting" (A p. 102) .
6

Quad Proof

This unit is equipped with Waterproof, Dust-proof, Drop-proof and Freeze-
proof features.
Waterproof:
Equivalent to IEC
Standard publication
529 IPX8 (30 minutes
at depths up to 5 m)
Drop-proof: This
camera clears
company testing
compliant with MIL-
STD-810F Method;
516.5
Shock: Dropping onto
plywood 3 cm thick
from a height of 1.5 m
Caution :
There is no guarantee that there will be no damages when the unit is used
0
within the above-mentioned limits.
Scratches and dent caused by the impact if the unit is dropped, or other
changes in appearance are not included in the warranty.
Malfunction due to mishandling will void the warranty.
0
Before use in water, be sure to read and understand the "Before Using
0
Underwater or under Low Temperature" (A p. 7) .
Close the terminal cover firmly until it clicks and confirm that the red sign
0
completely goes off.
Make sure that there is no damage to and no foreign material adhered to
0
the packing inside the cover.
Use within a water depth of 5 m and a duration of 30 minutes.
0
The waterproof performance cannot be guaranteed if the camcorder is
0
subject to impact such as dropping.
Do not jump or dive into water holding the camcorder.
0
Do not use the camcorder in strong water flows such as in rapids or under
0
waterfalls. The strong water pressure may impair the waterproof
performance.
Do not immerse into hot spring, or hot water above 40°C.
0
Dust-proof: Equivalent
to IEC Standard
publication 529 IP5X
Freeze-proof:
Allowable operating
temperatures: −10°C
to +40°C
Note: Temperatures
between −10°C and
0°C temporarily lower
battery performance,
reducing the time
available for recording.