Environment And Safety; Battery Requirements - Philips VOIP3211S/90 User Manual

Table of Contents

Advertisement

Environment and safety

Safety information
This telephone is not designed for making emergency telephone calls when the power fails. An alternative
should be made available for access to emergency calling.
Power requirements
The product requires an electrical supply of 120 volts, single phase alternating current, excluding IT installations
defined in standard EN UL 60950.

Battery requirements

The handset requires power source of two rechargeable NiMH batteries, size AAA 1.2V 650mAh (Hr11/45).
CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
Never use non-rechargeable batteries; use recommended type supplied with this telephone. NiMH
batteries must be disposed of in accordance with the applicable waste disposal regulations.
WARNING : The electrical network is classified as dangerous according to criteria in the standard
UL 60950. The only way to power down this product is by unplugging the power supply from the
electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily
accessible.
Telephone connection
The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the
standard UL 60950). Following a power cut, the call in progress is lost.
Safety precautions
>
Do not allow the handset to come into contact with liquids or moisture.
>
Do not open the handset, base station or charger. This could expose you to high voltages.
>
Do not allow the charging contacts of the charger or the battery to come into contact with extraneous
conductive materials.
>
There is a slight chance that the telephone could be damaged by an electrical storm. It is recommended
that users unplug the phone from the USB socket and the phone line from the phone wall socket during
a storm.
>
Do not use the handset in an explosive hazard area such as where there is gas leaking.
>
Young children should be supervised to ensure that they do not play with the telephone.
>
Because the phone works by sending radio signals between the base unit and the handset, wearers of
hearing aids may experience interference in the form of a humming noise.
>
We advise that this phone should not be used near intensive care medical equipment or by persons with
pacemakers.
>
Your phone can interfere with electrical equipment such as answering machines, TV and radio sets if placed
too close. It is recommended that you position the base unit at least one meter from such appliances.
CAUTION : Use only the mains adapter supplied with this telephone. Incorrect adapter polarity
or voltage can seriously damage the unit.
Base adapter
Input : 120VAC 60 Hz
Output : 9VDC 300mA
Charger adapter
Input : 120VAC 60 Hz
Output: 9VDC 150mA
US
5

Advertisement

Table of Contents
loading

Table of Contents