Q5X QT-5100 Series User Manual page 16

16
MicCommander
MicCommander (QG-H2)
DEVICE CONFIGURATION CON'T
Default Channel:
Default is Channel 25 for RCAS as it is generally the channel with the least amount of interference. If the control
process seems to be borderline, go to Tools, enter the 2.4 Spectrum mode and view the local activity on the
2.4GHz band.
Channel Selection:
It is important to ensure the QT-5100 transmitter
and MicCommander are on the same control
channel. There are 16 pre-set channels which
can be used; 11 to 26.
They are 5 MHz apart and 2 MHz wide so there is
no overlap. The chart shows the channels and the
specific frequency for each.
LCD Contrast:
The contrast level of the LCD display can be adjusted by selecting the value next to "LCD Contrast" and by pressing
the up and down arrows change the value.