Related Manuals for Q5X QT-5100A
Summary of Contents for Q5X QT-5100A
- Page 1 QT-5100A Module Description This document describes the use of the QT-5100A transmitter. History Rev 1 Original...
- Page 2 Warning: This module has been designed to operate with only the supplied integrated antenna or the supplied SSMA antenna for the 802.15.4 Radio. Replacing or modifying these antennas is strictly prohibited. QT-5100 Module Rev 1-march15.doc Page 2 of 8 Q5X Systems, Inc. 2018...
-
Page 3: Innovation, Science And Economic Development Canada
Approved antenna and connectors Antenna / Connector Manufacture Connector Type Max Gain Type Integrated Antenna 3dBi SSMA Whip Antenna Sam Woo Electronics SSMA 0 dB QT-5100 Module Rev 1-march15.doc Page 3 of 8 Q5X Systems, Inc. 2018... -
Page 4: Rf Exposure Compliance
Revision: 1 RF Exposure Compliance: The QT-5100A Module is granted with a modular approval for mixed mobile and portable applications. The module is to be used by Quantum5X in their final products without additional FCC/ISED (Innovation, Science and Economic Development Canada) certification if they meet the following conditions. - Page 5 ‘‘Contains “. Any similar wording that expresses the same meaning may be used. Below are Sample Module and Product lables that must be used for the Module and the Product. QT-5100 Module Rev 1-march15.doc Page 5 of 8 Q5X Systems, Inc. 2018...
-
Page 6: Out-Of-The-Box Setup
Using the Reset Key Occasionally the QT-5100A has an issue where the unit may occasionally need to be reset after being connected to a charger. The Reset Key is a small male USB device with a yellow shrink wrap to identify Use this only if the transmitter becomes unresponsive. -
Page 7: Status Led
On/Off Pushbutton The pushbutton is used to turn the QT-5100A on and off. If the transmitter is Off, press and hold the pushbutton for 3 seconds to turn the transmitter On. If the transmitter is On, press and hold the pushbutton for 5 seconds to turn the transmitter Off. - Page 8 Technical Data 802.15.4 Radio RF Power Output: 18 dBm (max) RF Carrier Frequency Range: 2.405GHz – 2.480GHz Technical Data QT-5100A Module Power Requirements: 3.7V Internal Lion battery (non-removable - rechargeable) Max Input Audio Signal: 1V RMS Audio Gain Adjustment Range: 0 dB to 30 dB...