Table of Contents
Advertisement
HCS-3020 4020
Parts Required:
1.
Close choke (COLD START [
position). This prevents dirt from
entering the carburetor throat when
the air filter is removed. Brush
accumulated dirt from air cleaner
area.
2.
Remove air filter cover. Brush dirt
from inside cover.
3.
Replace filter if it is damaged, fuel
soaked, very dirty, or the rubber sealing edges are deformed.
• Lightly brush debris from filter.
• Soak heavily soiled filters in water/detergent solution to loosen dirt, then
brush lightly.
• Rinse with clean water and allow to dry completely before reuse.
4.
Install air filter in air filter case.
5.
Install air filter cover.
Fuel Filter
Level 1.
Parts Required:
Fuel is VERY flammable. Use extreme care when mixing, storing or
handling, or serious personal injury may result.
1.
Use a clean rag to remove loose dirt
from around fuel cap and empty fuel
tank.
2.
Use the "fuel line hook" to pull the fuel
line and filter from the tank.
3.
Remove the filter from the line and
install the new filter.
X7702243800
© 3/2016 ECHO Inc.
AIR FILTER
]
FUEL FILTER
MAINTENANCE
25
Advertisement
Table of Contents
