Amped Wireless HIGHPOWER TAPEX3 User Manual page 105

Touch screen ac1750 wi-fi range extender
Hide thumbs Also See for HIGHPOWER TAPEX3:
Table of Contents

Advertisement

TAP-EX3
d. Check to see that your home Wi-Fi router is still on. If it has been turned off please turn it back on. The
Range Extender should automatically reconnect to your Home Network within 10 minutes.
e.
If the range extender does not automatically reconnect, try rebooting the Range Extender by
unplugging the power cable and plugging it back in.
I have a dual-band router and I cannot extend it.
a.
The Range Extender will repeat the 2.4GHz signal and the 5GHz signal from your router simultaneously.
Both wireless networks must have a signal strength of 70% or greater with the Range Extender for a
reliable connection. Make sure that your dual band router is close enough to the Range Extender to
receive a strong signal.
b. Check to make sure that you have the correct security key for both the 2.4GHz and 5GHz network of
your dual band router. These keys may sometimes be different from each other.
c.
Check that the antenna is connected securely to the antenna connector.
d. Ensure that your dual band router does not have any security features enabled, such as MAC address
filtering. If it does, disable it and try again.
USER'S GUIDE
104

Advertisement

Table of Contents
loading

Table of Contents