Makita UR008G Instruction Manual page 8

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Handle type
No load speed
(at each rotation speed level)
Overall length
(without cutting tool and battery)
Nylon cord diameter
Applicable Nylon cutting head
cutting tool (P/N 197993-1)
and cutting
Plastic blade
diameter
(P/N 198383-1)
(P/N 199868-0)
Rated voltage
Net weight
Protection degree
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Take particular care and attention.
Read instruction manual.
Keep distance at least 15 m.
15m(50 )
FT
Danger; be aware of thrown objects.
UR008G
Loop handle
3: 0 - 5,000 min
2: 0 - 4,600 min
1: 0 - 4,000 min
1,803 mm
2.0 - 2.4 mm
430 mm
255 mm
305 mm
D.C. 36 V - 40 V max
5.0 - 5.7 kg
IPX4
BL4020 / BL4025* / BL4040* / BL4050F*
* : Recommended battery
DC40RA / DC40RB / DC40RC
Never use metal blade.
Wear a helmet, goggles and ear protection.
8 ENGLISH
-1
-1
-1
PDC01 / PDC1200